TheEnds updated collection (P90 and P* update)
Jul 25, 2013 20:08:32 GMT -5
Pagan and blackswift like this
Post by TheEnd on Jul 25, 2013 20:08:32 GMT -5
Classic Army bevel gear vs 22.2v 30C lipo
Long story short, instead of grabbing my 11.1 lipos wired in parallel I grabbed my (not for airsoft) 11.1 lipos wired in series while packing for Northern Light. I played the whole two day event with a 22.2v 30C lipo. Surprisingly my CA 416 didn't mind but I kept it strictly to semi auto for obvious reasons. While pinned down with my squad and fire coming from several directions I ducked into some sort of machine and turned to fire back. At some point my selector had brushed against my gear and flipped to auto. About 60 bb's and a second later I just heard motor whine. Here's why.
WE HK416 Open bolt
I picked this up from Gunslinger at Northern Light. I plan on making it my new primary as I have grown tired of electric rifles. Everything is real except the PEQ15. Internally it has an RA Tech Npas, full steel firing pin (pin, frame, knocker), steel delayer, steel bolt catch, and 150% springs. I plan to install a steel trigger set as soon as I can figure out which brand is actually worth buying (RA Tech hammer is too tall). It fired around 1,000 rounds this weekend and the only hiccup was a vented mag. I have a lot of faith in the new open bolt system and it has a lot going for it. Most of all 30rds and recoil make the game much more fun. I plan to put all these internals into my Gen1 closed bolt body since it has full trademarks.
HK4 series rifles
WE HK416 Gen1 Trademarked closed bolt converted to open bolt
WE HK416 Gen3 open bolt
VFC HK417D (still a WIP, I know that is a 5.56 ACOG)
Missing: Classic Army HK416D (getting new gear set as noted above)
Potential HK416 PTW
I have a plan to transplant all of the non trademarked WE 416 bits into the trademarked body. Then I would like to take the non trademarked upper and convert it to PTW use. I really wish my PTW wasn't painted, and this solves 50% of my problem.
VFC SCAR H SSR
So, I hate VFC SCARs, but I love 7.62 rifles. I ended up trading a team mate a rifle he has wanted for a while. Not sure what I'll do with it but my Polar Star will be showing up soon and I'm sure my M82 will get annoying to lug around after a while so maybe it will go in here. I prefer black SCARs so I'm happy. Didn't come with BUIS or correct FH.
Long story short, instead of grabbing my 11.1 lipos wired in parallel I grabbed my (not for airsoft) 11.1 lipos wired in series while packing for Northern Light. I played the whole two day event with a 22.2v 30C lipo. Surprisingly my CA 416 didn't mind but I kept it strictly to semi auto for obvious reasons. While pinned down with my squad and fire coming from several directions I ducked into some sort of machine and turned to fire back. At some point my selector had brushed against my gear and flipped to auto. About 60 bb's and a second later I just heard motor whine. Here's why.
WE HK416 Open bolt
I picked this up from Gunslinger at Northern Light. I plan on making it my new primary as I have grown tired of electric rifles. Everything is real except the PEQ15. Internally it has an RA Tech Npas, full steel firing pin (pin, frame, knocker), steel delayer, steel bolt catch, and 150% springs. I plan to install a steel trigger set as soon as I can figure out which brand is actually worth buying (RA Tech hammer is too tall). It fired around 1,000 rounds this weekend and the only hiccup was a vented mag. I have a lot of faith in the new open bolt system and it has a lot going for it. Most of all 30rds and recoil make the game much more fun. I plan to put all these internals into my Gen1 closed bolt body since it has full trademarks.
HK4 series rifles
WE HK416 Gen1 Trademarked closed bolt converted to open bolt
WE HK416 Gen3 open bolt
VFC HK417D (still a WIP, I know that is a 5.56 ACOG)
Missing: Classic Army HK416D (getting new gear set as noted above)
Potential HK416 PTW
I have a plan to transplant all of the non trademarked WE 416 bits into the trademarked body. Then I would like to take the non trademarked upper and convert it to PTW use. I really wish my PTW wasn't painted, and this solves 50% of my problem.
VFC SCAR H SSR
So, I hate VFC SCARs, but I love 7.62 rifles. I ended up trading a team mate a rifle he has wanted for a while. Not sure what I'll do with it but my Polar Star will be showing up soon and I'm sure my M82 will get annoying to lug around after a while so maybe it will go in here. I prefer black SCARs so I'm happy. Didn't come with BUIS or correct FH.