Renegade
New Member
CAm15a4 with 4x20 scope... yummy
Posts: 71
|
Post by Renegade on May 2, 2004 8:12:18 GMT -5
On my m15a4 i cant get the stuipid orange tip off. I want it off to the a silencer on it but i also want to be able to keep it for transpotation reasons.
HELP
|
|
|
|
Post by camophreak on May 2, 2004 8:21:30 GMT -5
take a pair of vice grips and turn it hard!!
dont forgit the threads are backwards compared to the normal way.
I just took mine off..but it torn it up...I just took it off and put the metal one on permanately..if you transport your gun, just put itin a case.
thats what the GR & KZOO county police told me to do.
hope this helps.
-CP
|
|
Renegade
New Member
CAm15a4 with 4x20 scope... yummy
Posts: 71
|
Post by Renegade on May 2, 2004 8:36:51 GMT -5
thanks for the advice, i tryed the He-man strenght test but i could get it of, know im goin to bust this lil mother off once and for all!!
|
|
|
|
Post by Knief on May 2, 2004 8:58:37 GMT -5
Do the CA's have a set screw in the bottom of the flash hider? Take a look for a small hole that might have a hex screw in it. If you remove or loosen the set screw, the flash hider should just spin off (clockwise to remove it). Or, CA doesn't use the system that Marui does and you're going to have to use some channel locks or something.
|
|
Renegade
New Member
CAm15a4 with 4x20 scope... yummy
Posts: 71
|
Post by Renegade on May 2, 2004 17:10:32 GMT -5
the orange tip didnt have a pin, the black one did though. It took a wrench to get it off. Thoses bastards used glue to try and keep it on and worst of all it was red, i had to vacum clean  |
|
