|
Post by SolidDK on Mar 22, 2004 16:59:19 GMT -5
ive looked everywhere for these mags...and cant find one, so im starting to think that i can use an m16 mag...but not sure, so, my question is, "What hi-cap mag do i get for the CA m15a4 tactical carbine?"
thanks
|
|
leanpocket25
New Member
Sr-16 350 fps w/ accessories
Posts: 515
|
Post by leanpocket25 on Mar 22, 2004 17:14:45 GMT -5
Classic army hicaps... Uncompany I know for sure has them..
The m15 uses M4/m16 hicaps...
|
|
|
Post by luke213 on Mar 22, 2004 17:48:25 GMT -5
Pretty much any AEG armalite hicaps, couple brands off of the top of my head.
ICS CA TM AE(ICS) G&P
Those are in no particular order though for the most part the mags should function the same. You'll also notice more interesting things as far as price goes, CS and G&P should be near the lowest and both seem to function fine for me. So it's all up to you.
Luke
|
|
|
Post by SolidDK on Mar 22, 2004 17:54:32 GMT -5
thanks guys
|
|
21ca mod.
New Member
"I...... invented the internet"
Posts: 229
|
Post by 21ca mod. on Mar 22, 2004 20:02:11 GMT -5
marui mags dont fit in the M15A4, ma friend has one, and we tried to swap mags, and they didn't fit
|
|
|
Post by luke213 on Mar 22, 2004 20:11:09 GMT -5
Not trying to start anything here, but your wrong.
I run an M15A4 and have for quite some time with the mags listed in my response minus ICS. And yes they do fit.
Luke
|
|
21ca mod.
New Member
"I...... invented the internet"
Posts: 229
|
Post by 21ca mod. on Mar 22, 2004 20:26:58 GMT -5
maybe they are just really tight, i dont know. the only thing i know is i couldn't get the mag in
|
|
|
Post by sharpshot3r on Mar 23, 2004 0:01:01 GMT -5
I read somewhere that you couldn't get G&P mags to fit Classic Army armalite series guns
|
|
|
Post by xaos on Mar 23, 2004 0:01:47 GMT -5
I run an M15A4 and have for quite some time with the mags listed in my response minus ICS. And yes they do fit. Reading. Comprehension. Good.
|
|
|
Post by Motown on Mar 23, 2004 0:28:18 GMT -5
I believe only some metal bodies have troubles fitting G&P magazines, though I'm not confident enough to guess which.
However, to reaffirm Luke's sentiments and those echoed in many other threads, G&P mags should work on every "regular" plastic AEG body.
|
|
21ca mod.
New Member
"I...... invented the internet"
Posts: 229
|
Post by 21ca mod. on Mar 23, 2004 16:03:13 GMT -5
this is weird, we tryed the mags again, My standard mag wont fit, but my high cap does (no idea)
|
|
|
Post by luke213 on Mar 23, 2004 16:08:30 GMT -5
I've run both TM locaps and hi's in my M15A4, and CA standards, CA high's, and G&P mids so pretty much everything with no problems. Though I've heard of a few issues in the past I assumed they were either with earlier M4's before the M15's or just early M15's. Either way they should fit fine, if they don't fit then take a look at why, as the feed assembly on these guns isn't brain surgery:) It shouldn't be to hard to remove material where needed to make them fit. The main thing I used to hear was the mag catch wasn't lined up, which was an issue, though that has also pretty well been resolved as of now. And I haven't heard anything bad in the last few months about CA really, not to mention horror stories of how they are holding up. Mine has a few issues though I'm more than confindent it's my own fault so to me thats not an issue with CA.
Luke
|
|
|
Post by SolidDK on Mar 24, 2004 15:58:09 GMT -5
wow, thanks for the info Luke! can always count on you! it really helped.
|
|