|
Post by AHalo on Mar 13, 2004 16:10:45 GMT -5
The other day i bought a hicap mag with the little scroll thing on the bottom... when i came home with it i put some bbs in it and went to fire it. now whenever i use it it wont fire like every other 10 shots. ive cleaned my gun 3 times and sprayed a bunch of silicon oil. its still jams once in a while. just wondering if u have any suggestions
|
|
|
Post by Toothbrush on Mar 13, 2004 19:27:58 GMT -5
did you put silicon in the mag? o, and is it new or used?
|
|
|
Post by Knief on Mar 13, 2004 20:54:29 GMT -5
And what brand is it?
|
|
|
Post by camophreak on Mar 14, 2004 7:57:20 GMT -5
My hi-capmag is a piece of crap. The winding wheel doesnt wind correctly. Ive tried to wind it, load it and wind it again and it still mis-fires.
I turn my gun to the side and tap the mag and that seemed to keep it shooting.
I think we need to invent a new mechanism.
The higher the CALIBER, the BIGGER the HOLE!
|
|
|
Post by Nightcrawler on Mar 14, 2004 8:15:41 GMT -5
I had the sam problem as you once halo. Try winding it more. If it makes that ticka-ticka-ticka sound that's good. Keep winding and winding. Don't stop. When you hear a lound click, yer all set. You'l be able to the the click from the ticka-ticka-ticka. Hope it works out.
Nighty
|
|
|
Post by AHalo on Mar 14, 2004 10:29:48 GMT -5
not sure what brand it is since when i went up to the place i bought it thedude just took it out of one of the new mp5s. so it could be any brand. ill try nightcrawlers advice since ive never gotten a loud click out of it.
|
|
|
Post by Toothbrush on Mar 14, 2004 11:12:03 GMT -5
well if you got it out of a new gun that would mean it is probally either CA or ICS
If it is a CA MP5 hicap i had the ame problem with mine when i first got my CA MP5.
Just silicon the mag and use it, put silicon in both were you pour the bbs in and were they feed into the gun then wind it and release the tension a few times. Release the tension by pressing the bb stop back and letting the bbs out.
Hope that helps
|
|
|
Post by AHalo on Mar 14, 2004 14:39:22 GMT -5
thanks
|
|