PCSolutions
New Member
TM SIG552, KCS G19, TM M4A1 RIS coming soon,2 TM M92 Tachmaster coming soon
Posts: 116
|
Post by PCSolutions on Sept 14, 2003 3:11:40 GMT -5
ok... so I am a newbie..noobie.. however you guys wanna spell it. I have nothing else to say... I have a KSC G19 and a G18C. How do I adjust the hop-up and how do I know what the setting is that I adjusted it to? If I am correct ... right now it is adjusted all the way to the right. I think. So how do I know what it is set to??? Doesn't help either with the damn instruction manuals in Chineese. I have nothing else to say
|
|
|
|
Post by Minky on Sept 14, 2003 8:41:41 GMT -5
With the KSC Glock series hop-up, all the way to the right should be as low as you can set it. There's no specific setting that will work for every gun, so you'll have to take some time to shoot, adjust, repeat as needed. The KSC hop-up is one of the easiest to adjust though, so it shouldn't take you too long to get it set where you want it.
|
|
PCSolutions
New Member
TM SIG552, KCS G19, TM M4A1 RIS coming soon,2 TM M92 Tachmaster coming soon
Posts: 116
|
Post by PCSolutions on Sept 14, 2003 12:35:34 GMT -5
What do you mean is the lowest? I do not understand this hop-up stuff. does that mean that if it is all the way to the right that it will not go as far or what?
|
|
|
|
Post by Minky on Sept 14, 2003 13:35:52 GMT -5
Have you read the newbie FAQ yet? Basically when you have the KSC hop-up mechanism turned all the way to the right (as you're pointing the gun away from you), the least amount of hop-up spin is applied to the BB. All the way to the left and you'd have maximum hop-up, and your BBs would launch into orbit. Read up on how hop-up works, and you should be able to figure it out. You want it adjusted so that the BB will fly as far and flat as possible.
|
|
