Sub
New Member
Retired
Posts: 107
|
Post by Sub on Mar 22, 2006 16:36:05 GMT -5
i just got a bipod for my m24 and im now curious on how to put the thing on. i got the m24 socom sniper rifle bipod so if anyone can help me that would be great.
|
|
|
Post by Jacko on Mar 22, 2006 16:57:19 GMT -5
If you got a link to your bipod that'd be nice but otherwise it should attach to the forward sling swivel.
|
|
Sub
New Member
Retired
Posts: 107
|
Post by Sub on Mar 22, 2006 17:07:59 GMT -5
|
|
|
Post by Jacko on Mar 22, 2006 17:29:42 GMT -5
Maybe, it's hard to tell from the pics. It looks like a knock off Harris bipod which attaches directly to the swivel but I'm not sure what to do with that one.
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 22, 2006 21:02:26 GMT -5
Well here is the one on WGC that seems to be yours ( Here). I think, you may have to take your M24 apart, down to just the stock, unscrew the nut off of the screw, place if over the front swivel swing hole (inside the M24's stock), then put the screw in the bipod through the hole, and screw it into the nut. Then reassemble the gun. That's my guess anyhow.
|
|
Sub
New Member
Retired
Posts: 107
|
Post by Sub on Mar 22, 2006 23:46:28 GMT -5
that is the correct picture, and i was thinking that but the swivel isn't a screw, you can just pull it out. and with the screw in the bipod how it is i wouldn't be able to get the bipod tight up aginst the stock. is it seariously this complicated? i just dont want to drill a hole into my gun before i figure out if there is any other way.
|
|
|
Post by Gestapo on Mar 23, 2006 1:20:05 GMT -5
You don't have to drill anything. The stock should seperate from the trigger mechanism and the bolt assembly, and you just need to take out the sling swivel, and screw in the bipod where the sling swivel used to be.
|
|
|
Post by Dawg Bait on Mar 23, 2006 22:41:09 GMT -5
you have 2 diffrent types of bipods in your pics.. if your is like the CA one, then it just goes onto the sling lug. If its like the other you have to take the stock off and attach it when the stock is off the barrel assembley..
Ross
|
|
|
Post by O'Dwah on Mar 25, 2006 12:12:34 GMT -5
I have heard that this Bi-pod also works with the M16/M4, how is this?
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 25, 2006 12:36:06 GMT -5
Goes through the bottom of the hanguard. (take the nut off, put the bipod with the screw through one of the holes at the bottom, and then screw the nut back over the screw inside the hanguard).
|
|
Sub
New Member
Retired
Posts: 107
|
Post by Sub on Mar 25, 2006 12:52:28 GMT -5
ya i figured this out a few days ago. but the nut on the bipod is to small so you need to take it off the bipod and put the swivel from the rifle onto the bipod then it fits all snug. thanks for all the help.
|
|
|
Post by O'Dwah on Mar 25, 2006 12:53:30 GMT -5
Goes through the bottom of the hanguard. (take the nut off, put the bipod with the screw through one of the holes at the bottom, and then screw the nut back over the screw inside the hanguard). Okay, thanks.
|
|