|
Post by Bigmack on Dec 13, 2003 18:46:21 GMT -5
WD-40 is a bad choice for lubricating an Airsoft gun.
WD-40 has a habit of disolving rubber o-rings...
get some silicon shock oil from a hobby shop. 5 oz or so only costs around 3 bucks.
so far as the jamming is concerned, i can't help you there... Hadoken might be able to, however..
|
|
boblong2209
New Member
Banned! til 12/16
Marui Ak-47, WA SCW 1911, Marushin Ruger MK1 With Silencer
Posts: 14
|
Post by boblong2209 on Dec 13, 2003 18:54:21 GMT -5
This gun is strange
|
|
|
Post by Hadoken on Dec 13, 2003 21:56:38 GMT -5
I'm not too familiar with the Marushin model myself but it sounds to me like your hopup is tuned too high causing the bb's to jam.
Try working with the hopup a little more (less hop) and see if that fixes your jamming problems.
And again. WD-40 = bad for airsoft guns!
|
|
|
Post by silentkilla on Dec 14, 2003 18:01:27 GMT -5
oh! i had that exact same problem, but damn i cant remember how i fixed it!
i will rack my brain to try and remember, and then get back to you ASAP
|
|
boblong2209
New Member
Banned! til 12/16
Marui Ak-47, WA SCW 1911, Marushin Ruger MK1 With Silencer
Posts: 14
|
Post by boblong2209 on Dec 14, 2003 20:15:42 GMT -5
SilentK86 is my trigger on my gun broken. Or is it out of alignment?
|
|
|
Post by Dawg Bait on Dec 15, 2003 1:32:01 GMT -5
for lube on a GBB pistol i used real steel gun lube.. My beretta slide kept stick in the open position and now works perfect. but now here my question.. can i use it into of the barrels of my aeg, sniper, and GBBs?
Ross Dawg Bait
|
|
|
Post by luke213 on Dec 15, 2003 9:36:02 GMT -5
Dawg, what "real steal gun lube" did you use? As chances are it's not good for your gun, rule of thumb is only 100% silicone. Likely the lube your talking about uses petroleum products which have a tendency to eat away at rubber.
Luke
|
|
|
Post by silentkilla on Dec 15, 2003 11:44:24 GMT -5
the trigger is probably out of alignment.
i remember how i fixed my gun now ;D:
there was a jam in one of the levers that operate the trigger because this tiny little spring got all bent and f**cked up. i spent the last 15 min i was at pegisus wind to fix it. all you gotta do is bend the sucker back into place. then it should work
your gun might be a little different though.
|
|
|
Post by Dawg Bait on Dec 15, 2003 18:59:41 GMT -5
Luke i only used it on the metal part of the slide basically, i dont have the gun lube on me right now, it was my dads.. i will get it again and i will put it here.
Ross Dawg Bait
|
|