kwc m16-ar15-a2 gas leak

[viper1]

ok, i had a crack receiver that i fixed. now there is a leak where the chamber goes inside and on to the buttstock assembly it seems that the gun shifted over and i not making a perfect seal. my ? is what kind of poxy can i out between the gas chamber and the buttstock assembly i used silicone but the gas pushes threw the silicone . i need a semi hard sealer that would stop the gas from seeping threw the seal and would be easy to take apart for repair and easy to remove after a take apart the rifle.

[Knief]

Without having any idea of what you're talking about looks like, is there anyway you could fit a rubber O-ring in the fixture? Is the gas leaking out of an area where threading meets threading?

If you can get any pictures of the area around the leak, it would only make it easier for us to help you with it

[viper1]

sorry! let me try again. on a kwc gas rifle you have the chamber (sorry i dont know the name of this part) which receivces the gas in turn expells the bb and is located in the receiver. on this part i call the gas chamber there is 2 o-rings which go into the butt stock where the gas is stored. i have a leak between these 2 parts where this chamber meets the stock . i put silicone between these parts but the gas seems to push threw. if you the educate me more on the function and theory of mechanics in would appretiate it. is this a common problem with these gas rifles. i like only gas guns but i need it to be more dependable in a long skirmish without having to do a field tear down. also does anybody know where to get mags for my gun for cheap its a kwc-m16-ar15-a2 gas rifle. thank you sorry if there is any misspelled words. henry

[luke213]

Perhaps permatex for sealing car parts(IE Carbs). It's slightly flexible though seals quite well under some pressure. Might be just what your looking for. You should be able to source it at NAPA and maybe Wal-mart.


Luke