specs
New Member
Posts: 3
|
Post by specs on Nov 21, 2014 16:51:12 GMT -5
Hello, all. I have a question about the M110 compatibility with other parts. Here is the link to the M110: www.evike.com/products/45438/This says the gearbox is Ver. 2-fully upgradable, does this mean that the pistons, cylinder, gears, etc., are compatible with standard Ver. 2 upgrade parts? Thanks for your time.
|
|
|
Post by Ogre on Nov 21, 2014 16:59:38 GMT -5
Unless its a modified version 2 like some of the SR-25's use, then yes, it should be fully upgradeable,
|
|
T6e9a
New Member
Back in business
Posts: 911
|
Post by T6e9a on Nov 21, 2014 17:05:01 GMT -5
It will be compatible with those, yes. My slightest concern might be the nozzle, but chances are, it is a standard M4 nozzle.
It's Ares, which means it has either a microswitch trigger, or the whole computerized system. The only other parts I can think of the you might not find compatible are the triggers, cutoff levers, and selector plates/safety's.
But gears/pistons/piston heads/cylinder heads/tappet plates/springs/spring guides/etc should all be V2 compatible, but be aware some minor modification may be required.
|
|
specs
New Member
Posts: 3
|
Post by specs on Nov 21, 2014 18:05:17 GMT -5
Thank you both for your quick responses.
|
|