|
Post by archbishop on Mar 25, 2014 15:16:49 GMT -5
As the title states, I have an ICS glm in my possession that is not rotating, as in when I pull the trigger, nothing fires, and nothing rotates. Trigger issues? Or is it the actual latch that is broken? It still winds up, and spins the cylinder when I press the spring release, but anytime I pull the trigger, nothing happens. Thanks in advance for the help in figuring out my issue.
|
|
|
Post by archbishop on Mar 27, 2014 15:58:10 GMT -5
Still really looking for a answer to this. Any help is appreciated.
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 27, 2014 16:20:49 GMT -5
Hard to help when most probably don't have experience with this particular replica. If the cylinder still spins and works, but nothing works when you pull the trigger like usual. I'd have to say your problem lies somewhere within the trigger mechanism (does it feel or sound any different then when it worked before hand like a lighter pull then usual?) or the mechanism that the trigger engages is having issues.
|
|
|
Post by Stinger on Mar 31, 2014 13:24:53 GMT -5
As the title states, I have an ICS glm in my possession that is not rotating, as in when I pull the trigger, nothing fires, and nothing rotates. Trigger issues? Or is it the actual latch that is broken? It still winds up, and spins the cylinder when I press the spring release, but anytime I pull the trigger, nothing happens. Thanks in advance for the help in figuring out my issue. I'm a bit lost as to what is happening to your gun. With a battery in, what happens when you pull the trigger on semi-automatic? Does it move at all? What kind of sound does it make? You made it sound like it partially winds, which I have had occur to me often when trying to use a dead battery. Have you tested it with other batteries?
|
|
|
Post by Ogre on Mar 31, 2014 13:44:14 GMT -5
Grenade launchers don't use batteries.
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 31, 2014 15:41:37 GMT -5
This is what the OP is referring to FYI.
|
|
Gabriel
New Member
The face of a man who has seen the Ancient Ones is forever twisted by the memory.
Posts: 455
|
Post by Gabriel on Mar 31, 2014 17:22:42 GMT -5
If I'm not mistaken, pulling the trigger shouldn't rotate the cylinder, unless the airsoft version is different from the RS. Have you tried loading up and test firing it?
|
|
|
Post by TheEnd on Mar 31, 2014 19:39:06 GMT -5
I have one of these so I can try and help trouble shoot. Most likely something in the trigger group failed. For the sake of the thread, when you pull the trigger it fires the grenade and when the trigger is released the drum rotates. Repeat 6 times. Your best bet is to either take it apart and figure out which part is malfunctioning, or just buy a replacement back end. All parts for the ICS GLM can be purchased individually from Evike. My brother had his CC info stolen twice, each time shortly after buying from Evike. Take that info as you will. If you buy from them use a method that doesn't give them your credit card info if possible. Click here to see Parts at Evike.
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 31, 2014 19:44:29 GMT -5
#Paypal for the win.
|
|
|
Post by Stinger on Mar 31, 2014 20:31:11 GMT -5
Grenade launchers don't use batteries. Oh well I'm stupid. Disregard me in this thread.
|
|