Abbot
New Member
Duck season...
Posts: 746
|
Post by Abbot on Jan 15, 2014 17:03:05 GMT -5
Guys, my brother's HFC revolver has started to leak gas from the bottom of the grip. What should I do? Need Assistance!
|
|
|
Post by Costello on Apr 11, 2014 15:02:34 GMT -5
I'm having the exact same problem. Anyone got any advise.
|
|
T6e9a
New Member
Back in business
Posts: 911
|
Post by T6e9a on Apr 11, 2014 16:17:54 GMT -5
I'm kinda flying blind, as I don't have much idea how its built, etc. but I would try taking the fill valve out of the bottom(if that's where it's leaking) and inspect all of its O-rings. Make sure they are properly lubricated, possibly stretch/replace them, put it back together and see if that might solve anything.
This is not 100% what you should do, this is just what I would do, given I encountered the problem on my own gun. (Which I don't have a gas revolver, so it might be a while)
|
|
|
Post by Costello on Jun 25, 2014 8:25:16 GMT -5
Well, I finally fixed the problem on my pistol. I just got some replacement gaskets. Now I'm having a whole new problem. Before, the problem was that it wasn't taking in the gas. Now, the problem is it isn't letting any out. I think it has something to do with the pressure valve. The valve is loose, but I don't see anything that could be pressing it to release the gas. I know that probably sounds confusing but that's the ways it is. Does anyone know how to fix this?
|
|