Hogs Tooth *7.62*
New Member
I push peter, more sweeter, and more completer than any peter pusher around
Posts: 39
|
Post by Hogs Tooth *7.62* on Dec 21, 2013 14:59:53 GMT -5
I want to put a m16 barrel on my lm4 and make it look similar to an m16. will a typical AEG m16 outer barrel work with an lm4?
|
|
Gabriel
New Member
The face of a man who has seen the Ancient Ones is forever twisted by the memory.
Posts: 455
|
Post by Gabriel on Dec 21, 2013 19:38:35 GMT -5
Nope. I tried to put my AEG Madbull 10.3 inch outer on my LM4, and it's a no-go. It's hard for me to describe the exact problem, but I'll do my best:
The 'male' end of the barrel that fits into the 'female' end of the receiver is to long (insert joke there). Also, the parts of metal that jut out from the male end do not line up with the ones on the LM4 upper. Sorry for my lack of proper nomenclature.
|
|
|
Post by Bishop (Task-Force Nightmare) on Dec 21, 2013 20:04:44 GMT -5
I would check out ehobbyasia for a replacement barrel. I think KSC and KWA are pretty much the same as far as dimensions go for the GBB M4 series. Also I would look at KWA website or RA-TECH for possible upgrades. Hope this helps as far as finding options for a new barrel.
Sent from my SCH-I535 using proboards
|
|
Hogs Tooth *7.62*
New Member
I push peter, more sweeter, and more completer than any peter pusher around
Posts: 39
|
Post by Hogs Tooth *7.62* on Dec 22, 2013 14:28:34 GMT -5
thanks guys for the help. the other option I have is an outer barrel extension, not a mock suppressor, but and actual threaded barrel. do you think that would work? if so where would I go to get one? to get my barrel to about 20 inches?
|
|