|
Post by M.S.-ARC on Oct 2, 2013 10:25:43 GMT -5
I'm curious to see what you guys have.
By "Rare" I mean hard to find, discontinued, one of a kind. I'm not looking for custom builds with monster externals and internals. If you are submitting a custom build, it's got to be an airsoft version of a gun that nobody else is making. A good example of that would be stuff that Ruslan or El phantasmo created.
|
|
|
Post by Timm on Oct 2, 2013 11:40:45 GMT -5
Currently have: AtoZ dragunov, custom snow wolf M99.
Used to have a Strafer Mk4, TM Type 89, Tanaka M29, TM 5-7.
More if I can remember what I had.
|
|
|
Post by Soulless(Previously Lucipher) on Oct 2, 2013 12:15:13 GMT -5
A clear pulse rifle! Haha just kidding, ive got a revolver with was made to look like one from a TV show.
|
|
|
Post by Coldwave on Oct 2, 2013 12:38:01 GMT -5
There's a lot of airsoft revolvers floating around.
|
|
|
Post by Gunny87 on Oct 2, 2013 12:49:29 GMT -5
Pagan, Yankee and myself all have Star FNCs. Before they became ARES. Last time I saw one for sale was that one seller on ASF who was selling that lot of airsoft stuff for $20k. Yankee might have purchased the last "new" Star FNC off of Ehobbyasia last summer. I also happen to own a spare complete Star FNC gearbox as well that came with mine when I purchased mine back in spring of 2011.
The range on them stock is fantastic due to the fact that the hop up unit is actually partially inside the gearbox giving it fantastic air seal. It's a major pain in the ass though if you want to remove the inner barrel and replace the nub though. The 3 round burst is tits too.
Even all the accessories for them are practically gone from existence.
|
|
|
Post by Gimpalong on Oct 2, 2013 14:02:52 GMT -5
Lexan gearboxes in those?
|
|
|
Post by Pagan on Oct 2, 2013 14:04:07 GMT -5
Lexan gearboxes in those? Yuppers.
|
|
|
Post by Combat Junkies Airsoft on Oct 2, 2013 14:12:39 GMT -5
AtoZ dragunov and a CA m16 from the first shipment into the u.s. or so I was told by simon from WMI. It' serial number is in the 900's.
|
|
|
Post by Coldwave on Oct 2, 2013 14:28:24 GMT -5
I have potentially one of the first Non-Magpul licensed A&K Masada's to make its way to Michigan (Source: Arc)
|
|
|
Post by M.S.-ARC on Oct 2, 2013 14:36:24 GMT -5
I have potentially one of the first Non-Magpul licensed A&K Masada's to make its way to Michigan (Source: Arc) I was about to post that you now have that. It is as far as I know the first one to come here. It came at a time when customs was blocking every A&K masada coming into the US due to Magpul complaining that A&K made the masada without their consent. A&K created a different company called Monda International which is where I bought that masada. Here's a review I made about that company.They shipped the gun in pieces the other direction. It went through Asia, Europe, and then into the United States.
|
|
|
Post by Kilo Oscar Tango on Oct 2, 2013 16:33:47 GMT -5
Pagan, Yankee and myself all have Star FNCs. Before they became ARES. Last time I saw one for sale was that one seller on ASF who was selling that lot of airsoft stuff for $20k. Yankee might have purchased the last "new" Star FNC off of Ehobbyasia last summer. I also happen to own a spare complete Star FNC gearbox as well that came with mine when I purchased mine back in spring of 2011. The range on them stock is fantastic due to the fact that the hop up unit is actually partially inside the gearbox giving it fantastic air seal. It's a major pain in the ass though if you want to remove the inner barrel and replace the nub though. The 3 round burst is tits too. Even all the accessories for them are practically gone from existence. I have a STAR M16A3 with A.R.M.S. S.I.R. long rail, along with the impossible to find Gen III SRC MG36. I think I've only seen two other SIR-L rifles on the whole wide interwebz. My brother has a STAR M14 EBR (long), STAR L85A2, and STAR L86. Too bad STAR is gone, they made absolutely magical AEGs. 350fps out of an M16 and the range and consistency outmatched everyone on the field, and the L85/L86 has a legendary status on our field. ARES is hit or miss, the TAR-21 I have is still pretty good, but not much else seems that impressive. Gasp! I have no recent photos. I should remedy that.
|
|
|
Post by M.S.-ARC on Oct 2, 2013 17:06:25 GMT -5
Pagan, Yankee and myself all have Star FNCs. Before they became ARES. Last time I saw one for sale was that one seller on ASF who was selling that lot of airsoft stuff for $20k. Yankee might have purchased the last "new" Star FNC off of Ehobbyasia last summer. I also happen to own a spare complete Star FNC gearbox as well that came with mine when I purchased mine back in spring of 2011. The range on them stock is fantastic due to the fact that the hop up unit is actually partially inside the gearbox giving it fantastic air seal. It's a major pain in the ass though if you want to remove the inner barrel and replace the nub though. The 3 round burst is tits too. Even all the accessories for them are practically gone from existence. I have a STAR M16A3 with A.R.M.S. S.I.R. long rail, along with the impossible to find Gen III SRC MG36. My brother has a STAR M14 EBR (long), STAR L85A2, and STAR L86. Too bad STAR is gone, they made absolutely magical AEGs. 350fps out of an M16 and the range and consistency outmatched everyone on the field, and the L85/L86 has a legendary status on our field. ARES is hit or miss, the TAR-21 I have is still pretty good, but not much else seems that impressive. I'll put my vote in to turn this into a photo thread and move it over to the gallery and when I get home I can put up photos. If you guys have photos, post them and I'll move this over to the gallery.
|
|
|
Post by Pagan on Oct 2, 2013 17:14:36 GMT -5
The SK FNC collection: The second from the top is a G&G, so just disregard that one.
|
|
|
Post by Deacon on Oct 2, 2013 17:43:38 GMT -5
I had a Tanio Koba USP .40 S&W upgraded, have a Tanaka Pre Ban now. That's about as rare as I get.
|
|
Novak
New Member
Posts: 220
|
Post by Novak on Oct 2, 2013 18:54:35 GMT -5
Does a pre-ban kwa g18c count?
Sent from my Torque using proboards
|
|