Deuce
New Member
Posts: 313
|
Post by Deuce on Jul 13, 2013 1:09:19 GMT -5
So I just got a Barrett .50cal aeg sniper in a trade. Now my question is where can I buy a good 850mm ish tight bore? I approximate the inner barrel to be about 889mm, at maximum.
|
|
Casper
New Member
Crazy Ghetto Rigger & Pimpin'
Posts: 917
|
Post by Casper on Jul 13, 2013 1:23:36 GMT -5
You will not be having enough cylinder volume to run that barrel unless you are shooting high FPS spring with really light BB if you are still using AEG gearbox.
|
|
Deuce
New Member
Posts: 313
|
Post by Deuce on Jul 13, 2013 2:27:07 GMT -5
Than what length should I stick with 590? 650?
|
|
Casper
New Member
Crazy Ghetto Rigger & Pimpin'
Posts: 917
|
Post by Casper on Jul 13, 2013 3:01:52 GMT -5
Using heavy BB like .36 or .40 509 or 550 is sufficient enough if you plan on 500+ fps.
|
|
Master_Oki_Akai
New Member
Minister of Indoctrination
The Urban Medic
Posts: 376
|
Post by Master_Oki_Akai on Jul 16, 2013 14:02:45 GMT -5
The longest barrel i found was a 715mm, i just ordered one from GI. It'll fit into my Dragunov AEG with about half an inch to spare. However i'm running it on my ver3 P* so i shouldn't have any trouble running it. Otherwise yes, you'll have to balance your +/- pressure and get your air volumes to match. I remember when someone else got their barret and they had the same problem getting the thing to keep up.
|
|