|
Post by Overkill on Aug 4, 2011 12:52:22 GMT -5
The best non-fan solution I've found for goggles is to buy a set of the ESS Profile goggles, order one of ESS's thermal lenses (this helps with condensation on the goggles, etc, due to heat/cold absorbtion), and tear out all of the filter foam around the outer frame of the goggles. Oh, you will definitely need to buy their ESS Cortex clip as well to retain a "full seal" and insure BB's can't enter your mask through the thing rubber slots on the top and bottom of the mask.
I know several people have utilized FlakJak's as well, and have modified (NOT removed, MODIFIED) the vents on the top and bottom of the pair of goggles to achieve better airflow and still prevent BB's from entering the goggles.
I have tried dozens of wipes, sprays, pastes, etc for "Anti-Fog" purposes, and none of them have worked, but this certainly did the trick!
If all else fails, just buy a set of goggles with a fan in them, or get a fan kit off of ebay. Then you won't ever have to worry about fogging again (just replacing the batteries!).
|
|