Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 13:45:55 GMT -5
I need to remove my delta ring so I can put my G&P delta ring on. This may be a stupid question but I'm a newb when it comes to M4's. I don't quite understand how I am supposed to get it off.  |
|
|
|
Post by mobster913 on Aug 6, 2008 13:52:49 GMT -5
You should get an AR 15 armorers wrench. That is what is needed to get it off.
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 13:58:21 GMT -5
I have the wrench to unscrew it from the body. What I need to do is take it off of the outer barrel completely.
I'll post pics to help describe what I need done.
|
|
|
|
Post by Thor on Aug 6, 2008 14:21:13 GMT -5
I'm pretty sure you have to take off your front sight to take the whole thing off.
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 14:32:01 GMT -5
I'm pretty sure you have to take off your front sight to take the whole thing off. Thats what I thought, but how would I do that, and after I do that, can I put it back on? |
|
|
|
Post by Thor on Aug 6, 2008 15:02:25 GMT -5
You have to pound out the two pins on the bottom of the front sight post. Once you have it off, just slip it back on and drive the pins back in.
|
|
|
|
Post by mobster913 on Aug 6, 2008 15:07:09 GMT -5
There also may be a set screw underneath the front sight by the sling swivel.
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 15:33:41 GMT -5
You have to pound out the two pins on the bottom of the front sight post. What do you suggest I use to do that because I'm having no luck |
|
|
|
Post by cqbr on Aug 6, 2008 15:43:48 GMT -5
Find a screwdriver or allen wrench that fits in the hole and use that
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 15:53:41 GMT -5
Ok, I'm beginning to think that it would just be a hell of a lot easier getting a new outer barrel because the flash hider has yet to even budge. After all my attempts it wont move.
|
|
|
|
Post by cqbr on Aug 6, 2008 15:58:26 GMT -5
Just get a mepp-gas torch and melt the glue on it. It should come right off
Then get some pliers and wrench it off.
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 18:47:55 GMT -5
Ok, Ely and I got it, but my King Arms CASV still does not go on all the way. So I'm wondering if it is just not compatible with a G&P body or if the delta ring is not screwed on all the way. But when I try screwing it, it doesnt want to turn anymore. Any thoughts?
|
|
|
|
Post by mobster913 on Aug 6, 2008 19:07:43 GMT -5
The barrel may not work as G&P bodies have a different size housing for the barrel.
|
|
Mills
New Member
Team M.A.A.G.
Posts: 449
|
Post by Mills on Aug 6, 2008 19:41:31 GMT -5
I don't know if I understand what your saying. I'll try and post new pics soon.
|
|
|
|
Post by mobster913 on Aug 6, 2008 19:44:17 GMT -5
Disregard what I just said. Does the barrel fit in the body, or is it the delta ring that does not work?
|
|
