Delta Ring removal

[Mills]

Yes, the barrel fits in the body just fine, The delta rings works, I just do not know if it's screwed on all the way. I mean it looks like it is, but I've never ever worked on an M4 before, so I don't know...

[Tollis]

Are you going to be at the battle of the Hue? If you are I could help you with it.

[Mills]

No, but I will be at Tex's milsim.

[Jestar]

I searched, found this, on topic.

I've got a G&G M4 Commando and I want to toss this puppy on her www.airsoftgi.com/product_info.php?products_id=2187

Before I spend that kind of money, however, I'd like to know how to do this. The product explination states that one would not have to remove the delta ring and that some slight modification might be required.

Since I've never worked on this part of an AEG before what should I expect as far as the modification goes? Also, how do I remove the RAS that's already on my rifle?

[Dahm]

I believe that RASII clips into the delta ring, but its free floating because it secures to the upper receiver.

You might have to file down some of:

- Delta ring teeth
- Possibly upper receiver rails if they dont line up 100%

To remove the RAS on your rifle, pull the D-ring down towards the stock, exposing the "teeth" of the D-ring. Then remove the upper and lower halves of the RAS. Im assuming you have this kind of RAS, and it would work with this system.




Remove like so:




Hope that answers your question.

[Jestar]

Thanks, Dahm.
I'll try it out tonight and post with any problems I come accross.