tabomabi
New Member
TM MP5- SD6, KJW Glock-26 GBB
Posts: 80
|
Post by tabomabi on Dec 28, 2001 11:00:15 GMT -5
Does anyone know how to keep the caps on the damn gas cans!? they always pop back off and so as a result the metal tip keeps getting bent.
|
|
|
Post by Minky on Dec 28, 2001 11:39:02 GMT -5
I have nothing else to say, I've noticed the same thing! Once you rip that little perforated strip off, the caps don't snap onto the top anymore I've found that the black tops from KWC cans of gas fit though, so I use a couple of those for the big 1L green gas cans. As for bent tips...what the heck are you doing that the tips get borked up?! Unless you're carrying the can around and doing flips, it should be fine. I see in some of those pictures you posted that you were indeed carrying a can around strapped to your ass, which I would say is not a good idea. It seems like it would get in the way, not to mention if you forgot about it and sat on something sharp....your butt wouldn't be too happy I bet ;D
|
|
|
Post by SickPointe on Dec 28, 2001 13:46:08 GMT -5
Haha Minky its strapped to his back, not his ass.
|
|
|
Post by Unnamed on Dec 28, 2001 22:03:16 GMT -5
well if you look at them before you open them you can see why they wont fit. After you rip off the strip the top cant fit entirely back on. It only goes to the top of the metal ring. The perforated strip normally covers the ring of metal around the top but once its gone you cant holst the top back on.
|
|
|
Post by poplav on Dec 29, 2001 2:27:50 GMT -5
Yes, the KWC caps fit all cans well, but what I do with the white tear off ones is only tear as many perforations as you need to get the top off of the can(about 2 or 3). Then it will snap back on because the strip is still attached.
|
|