|
Post by O'Dwah on May 15, 2006 19:18:02 GMT -5
I have ordered some things to start making a base SPR out of my M15A4 Tactical Carbine, the first to arrive was a SOCOM Bi-pod. I have also ordered a VN Mid cap, 3-9x 40mm objective illuminated scope. A new hard type hop-up bucking, and Prometheus tight bore barrel. Spec's of gun: CA M15A4 Tactical Carbine(410fps-ish) G&G Tight bore barrel(6.04) 9.6v 3300mah Ni-Mh deans battery Prometheus Hard type hop up bucking CA SOCOM Harris Style Bi-Pod Leapers 3-9x 40mm Objective Illuminated Scope G&P VN Mid cap King Arms PSG-1 Style Grip ICS QD Knights Silencer Older Picture without Bi-Pod With Bi-Pod With Bi-Pod, and VN Mag. And here she is, in all her glory. Look out snipers I'm comming for ya.
|
|
|
Post by Matt (Achilles) on May 15, 2006 21:12:24 GMT -5
Looks Identical to Livonia's. I like it, get a pic up with the VN mag in
|
|
|
Post by O'Dwah on May 15, 2006 21:16:44 GMT -5
Yeah, thats why I said to look at his thread for a completed picture on SEMIA. Hopefully I will get the VN mag tomorrow, so I will post pics then.
|
|
|
Post by Livonia on May 16, 2006 14:01:13 GMT -5
im thinking about getting the star box set of Vn's but i only have 3 m16 pouches on my vest, and i would look good carrying a dump puch full of mags, so im just going to get a 120 rounder VN.
|
|
|
Post by Matt (Achilles) on May 16, 2006 17:09:49 GMT -5
Yeah but don't forget that VN mags small, can't you fit like 2 M4 mags per pouch on your vest sean. So double that with the VN mags
|
|
|
Post by SWAT A4 on May 16, 2006 17:21:40 GMT -5
Yeah but don't forget that VN mags small, can't you fit like 2 M4 mags per pouch on your vest sean. So double that with the VN mags How would he get the bottom ones out though? Even with magpuls, it would be hard, and I doubt there is enough room for a magpul.
|
|
|
Post by Matt (Achilles) on May 16, 2006 17:31:04 GMT -5
D'oh, good point, I wasn't thinking logicaly
|
|
|
Post by Toothbrush on May 16, 2006 18:31:01 GMT -5
Since they are the VN midcaps he could use "ranger" magpuls (paracord or paracord and duct 100mph tape). The Paracord would easily fold down with the 2nd mag on top but would still make it much easier to get out once the top mag is gone.
Assuming he uses a dump pouch or the like.
|
|
|
Post by Livonia on May 16, 2006 19:29:28 GMT -5
well i could, or just get 3 midcap Vn's
|
|
|
Post by O'Dwah on May 16, 2006 20:56:21 GMT -5
Updated pics.
|
|
|
Post by O'Dwah on May 23, 2006 21:30:19 GMT -5
No new pics yet, but I got my hop-up bucking today. And it's like a new gun now.
|
|
|
Post by O'Dwah on May 25, 2006 16:34:04 GMT -5
Updated pics, enjoy!
|
|
|
Post by Jumprefusal on May 25, 2006 16:46:56 GMT -5
I have the PM concept front end on my SPR, I think Redwolf sells it for 160. That would pretty much finish it if you want to make a 1:1 SPR, except for the barrel. BTW how much is that scope? I'd like to get one for my L96.
|
|
|
Post by O'Dwah on May 25, 2006 16:51:04 GMT -5
The scope is 59.99 at ShortyUSA. A steal if you ask me, they also have a 50mm objective(mines a 40mm) which would probably work better for you.
|
|
|
Post by Jumprefusal on May 25, 2006 18:06:04 GMT -5
Thanks, I'll probably get one. Back to the SPR, I highly recommend getting the PM concept parts. I built my entire SPR out of their stuff, mainly because I preferred buying pieces than dropping 500 bucks on a kit. I think over all it was about 370 bucks. Thats front end, barrel, front and rear sites, and the upper rail. I already had the scope and mounts. Upgrades on the other hand, that was bout another 250. Man it makes you think when you realize how much money you pump into these things doesnt it? BTW have you ever considered doing the "shorty" SPR? I've seen one made and it was surprisingly cool; and i'm the type to not like anything other than 1:1 real. Think of full stock, and no elcan site.
|
|