|
Post by Sarge411 on Mar 28, 2006 10:58:10 GMT -5
Heres my old M1911a1 SCW 2 w/ stainless chamber and new grips very nice pistol. Heres my new Kimber warrior SCW 3 , I was using it at a skirmish on the 26th and I lost one of the grip screws and the front sight, apparently WA needs to improve on how the attach the sight because it was just glued. If anyone has and extra infinity sight laying around I will buy it off you. Next is my Maruzen M870 Pump action shotgun, these are OOP and it is very satisfying to rock the bolt back.
|
|
|
Post by colonelangus on Mar 28, 2006 11:28:39 GMT -5
I love that shotgun...how's it shoot?
|
|
|
Post by Sarge411 on Mar 28, 2006 11:57:21 GMT -5
It is a little underpowered because it is meant for 134a but the shell injection evns out the lower performance. Although it does have a much great spread than spring shotguns including TM.
|
|
|
Post by Jacko on Mar 28, 2006 12:57:13 GMT -5
If you take apart that shotgun you'll probably find miles of extra microline they used to exchange gas from the reservoir. If you cut that down and remove some of the extra hose your power will improve. Munin can tell you how to really power up an M870 if you ask him.
|
|
|
Post by Sarge411 on Mar 28, 2006 13:56:31 GMT -5
Thanks Jacko I did notice that there was a lot of extra hose line that ran in spirals through the stock.
|
|
|
Post by O'Dwah on Mar 28, 2006 19:51:07 GMT -5
I want that M1911, look at it in all it's glory!
|
|
Scott
New Member
Posts: 25
|
Post by Scott on Mar 29, 2006 19:42:12 GMT -5
Same thing happened to the front sight of my KJW 1911. I was thinking of just cutting a new one out, painting, and gluing it on. I will probably make extras too.
|
|