|
Post by kdogg on Apr 1, 2006 23:41:07 GMT -5
Someone recently gave me one of those G&P Surefire tac light grip replica's for my MP5 and I'm having problems with the thing.
The light says on ALL the time. If you press the pressure pad or tinker around you can get it to go off but as soon as you left go of the pad, it comes right back on.
Is there a way to take this apart, clean or fix it? Buy a new pressure pad switch?
Thanks.
|
|
|
Post by SWAT A4 on Apr 2, 2006 0:23:42 GMT -5
Pressure switch is just two copperplates.... Probally bent or something....
I'd see if someone has better advice first.. but if not..
The wires might be touching, or if it is your switch... Might need to:
A: Stick a knife in from the end opposite the wires, and try and seperate it a little bit. B: Cut it open from the side, and fix the copper pad C: Take the switch off (It's glued), buy a new one and rewire it... D: Buy my grip if nothing else.
|
|