|
Post by BurningHate on Mar 10, 2004 20:56:33 GMT -5
i want to upgrade my stock MP5 RAS. internal wise, ive got a light and lazer sight already on it.anyways, im sorta new, and i wanna know if this spring will work for me, and if its easily intstalled. here is the link: www.airsplat.com/P_405.htmthis is my first AEG, and i didnt know too much about keeping it in good condition, and i dry fired it a lot when i first got it, i dont know how much damage, if any it did, but if soemthing where to be damaged, how would i tell, and what would i need to replace it?
|
|
|
Post by luke213 on Mar 10, 2004 21:09:24 GMT -5
I'm not sure I would trust CA for springs just because with spotty CQ you could get some really varied results. Now it really depends on how high you want to go, I can suggest 888 from Hawaii he sells prometheus products. www.honolulu888.homestead.com/Aeg.htmlYou could also stop in or visit the websites of our local Michigan retailers for simular pricing(well probably $20ish). Now as I said above it's all about how high you want to go, myself I would consider an M100 off 888's site that would set you under 350 so you can still use your gun for CQB. It also should be a simple install with just metal bushings. Those can be found at the same link. Then I would suggest you take a trip to: www.airsoftplayers.com/mechbox/tutorial.aspThis is a full guide to upgrade your spring and bushing's essentially what you need to do. Good luck and take your time. Luke EDIT: And before you ask check this thread for where to get the lubricants you will need: miairsoft.proboards2.com/index.cgi?board=tech&action=display&n=1&thread=8216
|
|
|
Post by BurningHate on Mar 10, 2004 22:14:11 GMT -5
you guys are a lot of help, well while we're in the newb section, is there a website that shows the complete breakdown of an AEG, because the more i look into it, i really dont know what parts i would need if i bought the M100. hopefully i wouldnt need anythig BUT the M100. but just incase, what would i need to upgrade the gun with. for the breakdown of the gun, i mean what each part does, ect. like i said im new to AEG's and im still learning, and asking questions is the best way for me to do so. thanks again
|
|
|
Post by luke213 on Mar 10, 2004 22:21:16 GMT -5
www.airsoftplayers.com/manuals.aspWill give you a list of manual's try the MP5 one it *should* show the correct break down for you. As far as other parts you will need, as I said above you will need metal bushings and the spring. Metal Bushing's Spring That should cover most of it. Good luck:) Luke
|
|
|
Post by xaos on Mar 10, 2004 23:24:05 GMT -5
Advice: Find someone willing to help you do the upgrade, and watch them do it. If you've no clue what you're doing, you could very well hurt your gun. If you're confident in your ability to figure it out and get it right, go right ahead.
If you're in Wayne County, I'd be willing to help. I know my way around the insides of an MP5, and would be glad to show you whatever you may need.
|
|
|
Post by BurningHate on Mar 13, 2004 21:59:21 GMT -5
well....its too bad, i dont live in wayne, im in oakland...so....im gonna try it myself, but if i break it down and dont feel confident, im not gonna mess with it, ill contact someone that will help. thainks again fellas
|
|