shado
New Member
Posts: 28
|
Post by shado on Mar 6, 2008 11:57:35 GMT -5
Hey everybody, I was just wondering.. Does anyone know how to replace the inner bore? Do any of you have any guides? I've been looking around google for days, and haven't really found a decent one.
Thanks
Shado
|
|
|
Post by Chaseman on Mar 6, 2008 12:28:46 GMT -5
You know the UTG L96 comes with a tight bore stock right? 6.03
|
|
|
Post by operatordoc01 on Mar 6, 2008 12:33:44 GMT -5
How long have you had your Sniper? That would determine if there is a TB in there or not Chaseman.
|
|
|
Post by Chaseman on Mar 6, 2008 13:13:30 GMT -5
How long have you had your Sniper? That would determine if there is a TB in there or not Chaseman. Yeah you are right Doc, It just sounded like he hasn't had it that long.
|
|
|
Post by Timm on Mar 6, 2008 18:02:33 GMT -5
How long have you had your Sniper? That would determine if there is a TB in there or not Chaseman. Dont you mean Sniper rifle?
|
|
|
Post by theactionman on Mar 6, 2008 21:21:37 GMT -5
|
|
|
Post by ilagftw on Mar 7, 2008 2:15:08 GMT -5
i used one of the DB tight bores and it sucked. Went right back to PDI's. DB's are just a waste of money.
|
|
|
Post by operatordoc01 on Mar 7, 2008 11:02:38 GMT -5
i used one of the DB tight bores and it sucked. Went right back to PDI's. DB's are just a waste of money. I dont know what you where using the DB in but I can tell you as of right now MOA is doing reviews on them as of this time. We just finished up the pistol one which is posted on here. We will be doing the AEG one this weekend as well. Also the big thing about DB barrels is that you can use low grade/quality bb's in them or they will jam. Again what where you using the barrel in and what type of bb's where you using at the time as well.
|
|
|
Post by ilagftw on Mar 7, 2008 11:07:09 GMT -5
i used it in a review and i used a bb sampler pack on it what had every high qualty .2 and .25 in it.
|
|
|
Post by operatordoc01 on Mar 7, 2008 14:07:50 GMT -5
You did not answer the questions: What type of gun where you using the DB TB in? and What brand of bb where you also using?
I have so far had very good luck with the DB barrels.
In this for all be looking for the next DB TB review will be a AEG one.
Doc
|
|
|
Post by ilagftw on Mar 7, 2008 17:23:46 GMT -5
it was in a Tanaka M700 and i awnsered your bb post that i used a bb sampler pack that had all the good name brands in them. No matter what i shot in it the PDI i was useing on avrage had 50% tighter groupings.
Rife was mounted in a Caldwell lead sled and test were based off 3 sets of 10 shot groupings for each bb brand with bolth the db and the pdi. Test were preformed indoors.
|
|
|
Post by redalert on Mar 7, 2008 23:55:40 GMT -5
For the UTG or any of those clone L96's you can use the same hop-up unit that they make for the maruzen L96 in there. I know for sure that you can use the PDI hopu-p unit which runs about 65 shipped from the right place so you could use any AEG barrel if you go that.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Nov 14, 2008 12:09:38 GMT -5
hey if you want to see how to take apart the gun go to youtube and type in cullen bond. he has a video on how to take out the inner barrel.http://www.youtube.com/watch?v=VAhrVYcx4aQ and www.youtube.com/watch?v=oEN5V-O2pdI are the link to the videos. check them out.
|
|
|
Post by BoredKender on Nov 14, 2008 12:13:15 GMT -5
No more posting from you until you read ALL of the rules and stickies. Have your first forum warning.
|
|