Grunt22
New Member
TM M16A2, KWC 1911, KWC P226, HFC M16A1
Posts: 338
|
delete
Apr 23, 2003 20:19:42 GMT -5
Post by Grunt22 on Apr 23, 2003 20:19:42 GMT -5
There are several upgrades for the M-24; Including PDI springs, tightbore barrels, etc. You'll have to search around for where you want to get the parts from. If your looking for parts that will work with your gun, and possibly purchasing, here is a good place to start looking, as they have quite a complete listing of parts: www.airsoftdynamics.com/Oh, Almost forgot... Another place that seems quite reputable and is closer would be here: www.airsoftgear.com/internal.htmNote: Some parts take quite a bit of skill to install ;D There's my .02 on it, if you would like to inquire more to me about it, you can PM me or E-mail me at LinebackerJ22@aol.com P.S. They are UK based... may take some $$ to ship from there if you are going to purchase from there... there are state-side dealers that have those parts though. - Grunt22
|
|
WTS-Mike
New Member
Preachah Man
Former Owner of Wolverine Tactical Supply and general all around nice guy
Posts: 577
|
delete
Apr 23, 2003 22:19:55 GMT -5
Post by WTS-Mike on Apr 23, 2003 22:19:55 GMT -5
so far the gas cylinder upgrade seem to be pretty popular (installed 4 of em in the last few months)
|
|
|
delete
Apr 24, 2003 11:14:06 GMT -5
Post by bong on Apr 24, 2003 11:14:06 GMT -5
well i already talked to you mike about the valve thing I have nothing else to say
the valve on the cylinder is stripped. where could i find a new one?..
|
|
|
delete
Apr 24, 2003 12:02:00 GMT -5
Post by Jacko on Apr 24, 2003 12:02:00 GMT -5
I believe the valve used is the exact same valve used in KWC magazines, though I'd verify that if I were you. I'm almost certain, but forget where I saw that, probably in the FPS magazine featuring the gas APS2 article.
|
|