|
|
Post by legionairsoft on Jul 2, 2014 13:07:52 GMT -5
I bought a kiss vector, and while it's perfect for outdoors, the 400 fps is a little too hot for cqb ;p any ideas how to lower the fps would be greatly appreciated.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187 
|
Post by zephurah on Jul 2, 2014 13:21:33 GMT -5
Well, if the gun is CO2. The only way that I can think of off the top of me head is to get a different valve. Maybe one that doesn't output as much gas, which I guess should lower the FPS. However if it is green gas then you could get some other form of gas that compresses less, maybe duster gas?
|
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Jul 2, 2014 13:47:49 GMT -5
Besides downgrading the type of gas you use which may not be enough to drop you to CQB levels, is to get a CQB Valve. |
|
|
|
Post by legionairsoft on Jul 3, 2014 8:46:11 GMT -5
I'm currently using propane, and it's shooting 393 with .2. Thanks for the advice about the cqb valve, I'll defiantly have to look into those.
|
|
|
|
Post by Kjones on Jul 7, 2014 1:11:35 GMT -5
Duster gas may be a option, It lowered one of my sniper rifles from 660 fps to 530 fps. Just look for a duster gas adapter ( about 6 bucks).
|
|
|
|
Post by legionairsoft on Jul 7, 2014 11:07:55 GMT -5
I have one from my older ai propane adapter, but honestly changing the valves seems like a better option. I'll defiantly keep that in mind though.
|
|
|
|
Post by Gunslinger on Jul 16, 2014 0:59:08 GMT -5
Danger werks flute valve. 20.00 I think and it gets you down to 340 to 357 ish with .20 gram bb's. If your not comfortable doing it get a tech to do it because it is a hellova pain in the ass but well worth it.
|
|
