|
|
Post by Shanker on May 28, 2011 17:28:39 GMT -5
|
|
|
|
Post by Mles on May 31, 2011 17:35:32 GMT -5
I am not sure on that specific fill valve, but for $13.99, why not? I am almost positive that any TM-compatible fill valve will fit the KJW. Why do you need a new fill valve anyways? Is it leaking?
|
|
|
|
Post by Shanker on May 31, 2011 18:59:23 GMT -5
I actually ordered it today right before you posted. Also, yes it is. I took it out looked at the o-ring, lubed it and everything and it still leaked.
|
|
|
|
Post by kdogg on Jun 8, 2011 10:55:58 GMT -5
Your 100% sure it's leaking AT the fill valve? I only ask because these are notorious for leaking around the base plate where the fill valve is located.
|
|
|
|
Post by Tollis on Jun 8, 2011 12:42:54 GMT -5
And from when I had the KJW P226 a while back, they used 7mm fill valves, those are 5mm. Your best bet would be to get TM P226 mags, they don't leak llike the KJW ones do and are easier to maintain. They also get a few more shots off than the KJW ones do.
|
|
|
|
Post by Shanker on Jun 8, 2011 15:10:25 GMT -5
kdogg, I am positive it is leaking at the valve. @tollis, I measured with a micrometer a few days ago and at the threads it is 5mm and at the part where the gas goes into the mag (not where you fill it at, but the bottom) it is 4mm.
|
|
|
|
Post by Mles on Jun 8, 2011 18:11:32 GMT -5
Shanker, if you send me the magazines I'll be able to work on them if you can't seem to fix the leaks. PM me for more information.
|
|
