|
Post by Knife on Mar 27, 2004 23:00:01 GMT -5
I have an STTI KJW made M92f GBB that i recently bought used. I load up the mag with gas and bbs. Everything goes well till now. I can fire the gun semi for about 3-5 shots with the bb's dont actually go into barrel, they just sit in the mag. Even when the slide blows back they dont load. The only thing i can think of that is causing this is when i first started shooting the gun, there is this little circlular hole that is rather wide and has a plastic piece under it that is used to blow out that gas. This is just my guess of what its use is. What happened was that it came out... way out and i have to push it place (it did not come out of the gun) So now every time i want to fire it, its like im bag with a spring gun that needs to be cocked everytime. Anyone have any idea whats goin on here? If anyone see's a manual i could show you the piece.
|
|
21CA-Iceman
New Member
Owner of 21st Century Airsoft
Posts: 554
|
Post by 21CA-Iceman on Mar 28, 2004 7:36:11 GMT -5
Just for checking sake, does the spring in the clip hang up at all? Have you tried cleaning and lubing the gun up, and the clip?
|
|
|
Post by Knife on Mar 28, 2004 12:09:53 GMT -5
The gun was already well lubed when i bought it. Sometimes it hangs up but only towards the very end of the mag. Partly its when theres a gap in the Double Stacking. This is not the problem. Because the second right after you shoot the gun and then need to pull the slide back, the BB is right there. So i doubt it is hanging up. What kind of lube would you suggest for lubing the gun?
|
|