|
Post by Kung Fu on Mar 8, 2004 16:49:52 GMT -5
Hey guys, I've noticed my handle on my SR has been loose lately, and i know there is something i can do to tighten it. Basically, which screw do I tighten?
Thanx ;D
|
|
|
Post by Jacko on Mar 8, 2004 16:55:51 GMT -5
There're three screws that are on the mounting block that butts up against the reciever. Take off the handgrips and tighten those some.
|
|
leanpocket25
New Member
Sr-16 350 fps w/ accessories
Posts: 515
|
Post by leanpocket25 on Mar 8, 2004 20:13:40 GMT -5
Hmm I too have noticed that on my sr-16.. Ill have to try that approach to fix it, Thanks jacko for your help ;D
|
|
|
Post by Jacko on Mar 8, 2004 20:15:19 GMT -5
Well, here's what I PM'ed Kung Fu. If someone who has a stock SR will double check this for me, I'd appreciate it, as my RIS doesn't even come off this way anymore.
Take the lower rail off by pulling the D-ring back towards the reciever. Then, you'll see the block. However, there are four tiny screws that hold the rest of the RIS on. Undo those, and you can get to the top of the mounting block. Tighten up the three screws, put the RIS back on, and you're all set!
|
|
leanpocket25
New Member
Sr-16 350 fps w/ accessories
Posts: 515
|
Post by leanpocket25 on Mar 8, 2004 20:17:54 GMT -5
I'll try it tonight Jacko and let ya know, Thanks againg man
|
|
|
Post by Kung Fu on Mar 8, 2004 21:09:47 GMT -5
Thanx a ton Jacko!
|
|
|
Post by Jacko on Mar 8, 2004 21:28:02 GMT -5
No problem, fellas, I just hope I described it right, it's been a while.
|
|