|
|
Post by Andy on Mar 1, 2004 18:50:08 GMT -5
I think I striped my gears. When I shoot the handal vibrates and shreeks very loud. I just but a new Huricane metal body on. Could I have not alighed my EG1000 properly?
|
|
|
|
Post by Ice on Mar 1, 2004 19:18:29 GMT -5
|
|
|
|
Post by Knief on Mar 1, 2004 19:55:33 GMT -5
If it shrieks, it's stripped. Try pulling the motor out to see if the pinion gear (gear on the top of the motor) or the bevel gear (first gear in the box that the motor contacts. you should be able to see it through the hole) is stripped.
|
|
|
|
Post by Andy on Mar 2, 2004 16:23:23 GMT -5
Thanks guys. What should I do if it's stripped? Should i buy a new moter or gear thing? Or should I go for an upgrade?
|
|
|
|
Post by Bigmack on Mar 2, 2004 16:30:30 GMT -5
new motor isn't going to fix the gears.
if its the gears, you'll need to purchase a new set.
if its the pinion gear on the end of the motor... you'll probly need to purchase a new motor.
|
|
|
|
Post by Munin on Mar 8, 2004 14:39:56 GMT -5
And if the strippage is bad enough, you might need to buy a new motor and new gears. Check them all to make sure that they're not worn or missing teeth.
|
|
Copeland
New Member
Sky Soldiers
Posts: 915
|
Post by Copeland on Mar 22, 2004 22:54:29 GMT -5
also check your piston those are known to strip as well and if youre gonna get new gear get some new bushings too
|
|
|
|
Post by Andy on Mar 29, 2004 9:06:54 GMT -5
Turned out to br my motor. Thanks for the help guys.
|
|
