|
Post by RogueLeader on Feb 21, 2004 19:05:12 GMT -5
ok. not to long ago i got my maruzen MP5k gbb, i got it used w/ the standard and 2 50rnd mags, one of the 50 rnd mags leaks, is there anything i can do to stop the leaking? id really appreciate any help seeing as how i really dont wnat to spend anymore $ on gbb mags than i need to(gotta start saving for my M15a4...)
|
|
|
Post by DE50man on Feb 21, 2004 19:21:48 GMT -5
you should search for gas mag problems, because i happen to know there have already been a few on this, anyway
the nozzle piece, where you put the gas, can be screwed in and out, try screwing it it as far as it can go (making the seal tigher)
if that doesnt work, unscrew it and remove the o-ring from the mag, then soak the o-ring in pure silicon oil overnight and reinstall it
|
|
|
Post by RogueLeader on Feb 21, 2004 20:02:59 GMT -5
thanks DE50man....your really helping me through out all my airsoft newb questions..I have nothing else to say...normally i do search just i posted this in a hurry so i didnt...sry about that....
|
|
|
Post by DE50man on Feb 21, 2004 20:21:02 GMT -5
thats ok, let us know if it works out alright
|
|
Andree
New Member
No one will fear me... How can you fear somthing that you have never seen,at its full potential
Posts: 464
|
Post by Andree on Feb 21, 2004 20:40:58 GMT -5
miairsoft.proboards2.com/index.cgi?board=tech&action=display&n=1&thread=8272that should help you... but after you read that read this.... I was playin with a friend and his M1 Carbine mag was leakin from the bottom... so we let the gas out... took a screw driver and took the little nozzle out that you put the gas into... sprayed lube all on that(silicon) and put it back in... that stoped it almost completely! Try that a few times, take it out spray it down and put it back then repeat for best results
|
|