|
|
Post by swartzhund on Feb 19, 2004 8:39:43 GMT -5
Does anybody know the stock fps for a KSC G17 metal version? I just ordered the Hurricane high flow valve set from combat depot that claims 30% power increase and I want to know my expected fps. Also; Please recomend a bb weight for this set up.
|
|
Nick
New Member
Posts: 203
|
Post by Nick on Feb 19, 2004 9:45:00 GMT -5
Dont know what the velocity will be, but I think you should use .25g BB's.
|
|
|
|
Post by Toothbrush on Feb 19, 2004 23:58:26 GMT -5
so you know heavier bbs with gas guns can cause higer FPS, heavier bbs cause valve to stay open longer - there is a thread on ASP about it too
|
|
|
|
Post by swartzhund on Feb 20, 2004 6:29:19 GMT -5
No, I didn't know that. I'm a bit of a noob yet. Thanks! APS? I'll have to check that out.......so much for my loyalty  |
|
|
|
Post by Knief on Feb 20, 2004 19:12:23 GMT -5
Toothbrush, let me see a link to that thread.
|
|
|
|
Post by DE50man on Feb 20, 2004 20:13:18 GMT -5
so you know heavier bbs with gas guns can cause higer FPS, heavier bbs cause valve to stay open longer - there is a thread on ASP about it too that is not how my KWC rat-flail seems to work, in fact, if anything, it would get less gas Let me explain: when the trigger is pulled, the hammer is released which hits a valve on the mag which in turn releases gas into the slide which propels the bb and causes the slide to go all the way back, when the slide is all the way back the valve on the mag is released and no more gas exits, then the slide goes forward by spring power There would be more force required to propel the heavy bb so the slide would get more gas toward moving the it rather than pushing the bb (the path of less resistence), which means the slide goes back faster and cuts off the gas faster |
|
|
|
Post by Toothbrush on Feb 20, 2004 21:17:48 GMT -5
|
|
