boblong2209
New Member
Banned! til 12/16
Marui Ak-47, WA SCW 1911, Marushin Ruger MK1 With Silencer
Posts: 14
|
Ak-47
Feb 3, 2004 20:30:59 GMT -5
Post by boblong2209 on Feb 3, 2004 20:30:59 GMT -5
I am getting an ak-47 soon and I need to know if I need new bolts on the stock. I heard they come loose.
|
|
|
Ak-47
Feb 3, 2004 20:37:38 GMT -5
Post by luke213 on Feb 3, 2004 20:37:38 GMT -5
As with anything else if you can't keep them tight use some loc-tite I can't imagine new bolts would help the matter much if any.
Luke
|
|
|
Ak-47
Feb 3, 2004 20:38:14 GMT -5
Post by Bigmack on Feb 3, 2004 20:38:14 GMT -5
the screws come loose, yes. Loctite works well.
|
|
testticool
New Member
Cross Before Crown
Posts: 977
|
Ak-47
Feb 3, 2004 21:37:14 GMT -5
Post by testticool on Feb 3, 2004 21:37:14 GMT -5
i would suggest also using loctite on the screw under the handle. That fell outta my AK once and the whole handle cover came off, serious risk of the motor dipping in mud
|
|
destrukto
New Member
Armalite Hater!
Those who swear by armalites have never owned an AK
Posts: 625
|
Ak-47
Feb 3, 2004 22:29:23 GMT -5
Post by destrukto on Feb 3, 2004 22:29:23 GMT -5
I had one screw fall out on the underside of my stock, went down in the basement, found a screw with the same size thread and cut it down to size with a hacksaw. problem solved. The only reason I noticed it was because the stock was wobbling a little bit, it's not something you really need to worry about though.
|
|