|
Post by sharpshooter123 on Jan 22, 2004 22:42:58 GMT -5
still not coming out.
|
|
|
Post by Viking on Jan 22, 2004 23:25:10 GMT -5
That’s cause Biggy forgot about the mag release button, there’s a hex screw in the middle of it, unscrew that pull out the button and spring and take the other part out the opposite side of the gun. Seriously if you cant figure out how to take it down by yourself you’re going to have a hell of a time putting it back together.
|
|
|
Post by sharpshooter123 on Jan 23, 2004 0:06:44 GMT -5
Gave up. I got the gearbox back in but can't seem to giggle the motor in right and also a screw fell in the motor. Thanks though.
|
|
leanpocket25
New Member
Sr-16 350 fps w/ accessories
Posts: 515
|
Post by leanpocket25 on Feb 14, 2004 14:56:27 GMT -5
I know this is an older topic but..
Sharpshooter I too broke one of my reciever Tabs off.. but I found a solution to fixing them which I did to my sr-16.. Do you still have the broken tab part? Well go about and buy some Devcon high strength plastic welder.. Its a thick liquid type substance that u mix together and place on both the the broken piece and the reciever of the gun. After applying it let it sit for 24 hrs. Sand it down to fit in the reciever of your gun and you have a near to perfect fix.
Hope that helps
|
|
|
Post by sharpshooter123 on Feb 14, 2004 21:04:30 GMT -5
Thankz but I geting a metal body by the end of March (hopefully).
|
|