|
Post by sharpshooter123 on Jan 21, 2004 18:48:31 GMT -5
The other day I pulled out my gun and heard a rattle in the handle. A piece of the tab came out (snaped both of them). When I put it back together it was shooting louder but fine. Today it would let all the bbs in the lowcap out. Any idea what is wrong and how can I fix it? I thought maybe it isn't setting the gears right but I have no idea.
|
|
|
Post by Jacko on Jan 21, 2004 19:01:01 GMT -5
Your reciever tabs snapped off?
|
|
|
Post by Viking on Jan 21, 2004 20:30:37 GMT -5
10 bucks says that part of your receiver tabs got into the gearbox and is messing things up inside, oh and don’t mind Uncle Jackass.
Fix: Do a gear box rebuild, clean it out, re-lube, put it back together, pray and then pull the trigger.
|
|
|
Post by sharpshooter123 on Jan 21, 2004 21:34:34 GMT -5
I DON'T KNOW HOW!!
|
|
|
Post by sharpshooter123 on Jan 21, 2004 21:55:19 GMT -5
NEVER MIND!!! I forgot to put the barrel back in ;D!!! HAHAHA. Damn i'm stupid, it was sitting right in front of me.
|
|
|
Post by DE50man on Jan 21, 2004 22:17:36 GMT -5
Well if you insist......
|
|
|
Post by Ballista on Jan 21, 2004 22:36:52 GMT -5
|
|
|
Post by sharpshooter123 on Jan 22, 2004 22:18:36 GMT -5
How do you remove the gearbox?
|
|
|
Post by Bigmack on Jan 22, 2004 22:22:50 GMT -5
if you have to ask...its best that you don't....
otherwise you'll be on here in 2 hours asking how to put it back together.
|
|
|
Post by sharpshooter123 on Jan 22, 2004 22:23:48 GMT -5
I don' think I'll have a problem. I'm pretty good at that.
|
|
|
Post by Viking on Jan 22, 2004 22:26:40 GMT -5
www.airsoftplayers.com/manuals.aspOr, give it to me and for a very small fee I can do what ever is needed. I use to offer my survices for free until one day I have 3 guns I had to get done and I almost went insane, damn annoying version 2... bring on the sexy ICS M4 Gear Box I say!
|
|
|
Post by sharpshooter123 on Jan 22, 2004 22:28:37 GMT -5
Ya, only one problem, I live in Southern CA (best forums around). ;D Don'r know how it was their but it was a cold 76 degrees today.
|
|
|
Post by Bigmack on Jan 22, 2004 22:29:52 GMT -5
Remove pushpins
sparate upper reciever from lower.
remove stock via screw.
remove battery cable
unscrew plate on the bottom of the grip...watch for the disc.
remove motor.
unscrew grip via two internal screws.
remove grip
push through pin in middle of lower reciever.
remove feed ramp from above mag well.
remove lower from mechbox.
that should be it... i havn't worked on an M16 in a couple months... if i've missed anything...someone chime in.
|
|
|
Post by Viking on Jan 22, 2004 22:32:19 GMT -5
76... lucky ass, I use to live in Santa Clarita the good ol days, it was 13 degrees in Howell today, I hate Michigan!
|
|
|
Post by Ballista on Jan 22, 2004 22:36:21 GMT -5
Supposed to be -17 tomorrow. Enjoy.
|
|