testticool
New Member
Cross Before Crown
Posts: 977
|
Post by testticool on Dec 27, 2003 18:48:52 GMT -5
recycling a thread to save some space ok, so when i shoot my gun in full auto, it will not reset the piston to it's original place. semi auto works perfect, the gun still shoots on both settings. but on full auto it wont reset fully. i think it has something to do with the tappet plate? i dunno. any help is appreciated. p.s. ignore the first 2 responses, they're old.
|
|
|
Post by Munin on Dec 29, 2003 11:21:01 GMT -5
Uh, stripped it down to nothing but wires? Does that mean that you also took the selector plate off the mechbox? Because you need that to bridge the gap between the two leads on the left side of the box. Without bridging that gap, the connection won't be complete and the motor won't spin.
Also, do you still have a fuse box? If so, check the fuse to make sure it's still intact.
|
|
|
Post by Arc on Jan 3, 2004 12:52:20 GMT -5
did you have the gearbox reassembled when you hooked it up to the battery? if the gears were misaligned, it can cause the gearbox to seize, and the motor will not turn.
|
|
|
Post by Jacko on Jan 8, 2004 19:01:30 GMT -5
That's how it's supposed to be, and the reason why folks say 'Shoot on semi once or twice' before putting the gun away to reset the piston.
|
|
testticool
New Member
Cross Before Crown
Posts: 977
|
Post by testticool on Jan 8, 2004 19:43:16 GMT -5
oh really?! wow... that seems weird... im glad you told me that. no one i know does that thanks for the help though jacko
|
|