Pyro
New Member
CA M15A4 Tac, Walther P99
Posts: 105
|
Post by Pyro on Dec 1, 2003 21:15:10 GMT -5
A friend of mine bought a ICS MP5A4 and it came with a high cap. The mag was working fine to begin with but then when you tried to wind it, it didnt build up any tension so no bbs were being fed out. After trying over and over again and it not working, he ordered another one (another ICS for some reason) and the same thing happened after about a full mag shot through it. Is there a way to fix this or not? I want it to work so I have someone to play against Thanks for the help -Pyro-
|
|
|
Post by Motown on Dec 1, 2003 21:46:03 GMT -5
He'd have to take the magazine apart. The problem should be with one of the springs inside (don't know what it's actually called unfortunately) as part of it has probably come out of the plastic deal. You should be able to see what I mean, once it's apart.
I used a little bit of tape to keep it from slipping out, and it's worked fine ever since, that is, if you're looking for temporary solutions.
|
|
Pyro
New Member
CA M15A4 Tac, Walther P99
Posts: 105
|
Post by Pyro on Dec 2, 2003 16:59:19 GMT -5
It could be really easy but since I dont have one infront of me could you please explain what to do so it doesnt get even more screwed up.
Thanks
-Pyro-
|
|
minimaster
New Member
Clark Kent my ass
Posts: 136
|
Post by minimaster on Dec 3, 2003 10:41:05 GMT -5
I had a problem with my AK high cap that I got with it, after a few full auto shots the tension winding thing just released and it made this zzzzziinnnnnnnggggg noise and I'd have to wind it back up again, It got so sickining that I took it apart took one of my pistol mag springs and super glued it into it and now its a fully workable 24 shot really lowcap mag
|
|