|
Post by Blackbeard on Nov 4, 2003 14:47:33 GMT -5
Hi,
I've got one of those KWC Desert Eagles, but it doesn't seem to be working right. First off, the mag only shoots off 5-6 bb's before its empty. But its not because the mag was loaded incorrectly, I held the can vertically aligned with the mag when I filled it and ejected several bursts of gas for several seconds long each into the mag. Gas would start to spray out and then I would let the mag warm up and then try it out. But still, it empties quicker than it should. Also, I noticed that there is a hissing sound coming from the bottom of the mag. The O rings aren't cracked and they appear to be seated correctedly in place. But the d@mn thing still leaks. If you have any info or suggestions I would greatly appreciate it, thanks.
|
|
Andree
New Member
No one will fear me... How can you fear somthing that you have never seen,at its full potential
Posts: 464
|
Post by Andree on Nov 4, 2003 15:14:48 GMT -5
it probly only shoots that much cause the gas is leaking out!!! Take a screw driver (flat head) and tighten up the bottom of the mag,the part where you load the gas... it should have little notch where a screw driver can fit... tighten it up till its snug, and that should stop the leak. and that should allow you to shoot a full mag before loading more gas
|
|
|
Post by DE50man on Nov 4, 2003 19:25:09 GMT -5
if tightening doesnt work and you are all out of options, uncrew the nozzle from the mag and soak the o-ring in pure silicon oil for a day, then put it back in snuggly, first just try tightening it though
|
|
Andree
New Member
No one will fear me... How can you fear somthing that you have never seen,at its full potential
Posts: 464
|
Post by Andree on Nov 4, 2003 22:42:11 GMT -5
I also heard that if the oring leaks.. then spary lube in it, i didnt hear that u had to soak it in lube, but that would probly work too
|
|
|
Post by Blackbeard on Nov 5, 2003 14:58:12 GMT -5
Yeah, I've soaked the O ring in lube and even cleaned out all the dirt and stuff just to make sure it seated alright in the mag. But I haven't tried tightening up the screw - ? I'll try that today, as soon as I have a chance. I'm about as sharp as a baseball. That's why I used stupid text speak..
|
|