box
New Member
TM MP5 SD5, KWC 92F Beretta
Posts: 71
|
Post by box on Aug 14, 2003 11:29:49 GMT -5
I was looking at the airsoftplayers.com forums and I saw someone say that they bought a mount from airsplat and just mounted it to the carbine of their M4. I was curious about this. Would it look odd on an MP5 SD5 with the normal cover over the handle?
|
|
|
|
Post by Rustpot on Aug 14, 2003 11:49:31 GMT -5
most likely
they do make an RIS set that clamps around the silencer can to let you mount a flash light and a laser
|
|
box
New Member
TM MP5 SD5, KWC 92F Beretta
Posts: 71
|
Post by box on Aug 14, 2003 11:56:01 GMT -5
Yea but the comparison is $10 for the one mount versus $70 for the replacement grip with mounts on it.
|
|
|
|
Post by xaos on Aug 14, 2003 12:01:24 GMT -5
I've explored some RIS options for my SD5...which made me decide I'll prolly just use my M93R for CQB stuff till I can afford a 3rd AEG (the second will be a G3 or Sig SG 550  ). Just bolting a rail onto the foregrip would be flat out oogly, IMO. If you just want a light or laser (one or the other - not both), First Factory makes a mount that goes over the base of the front sight post...and looks like it'd look nice on a gun. If you want a vertical grip, you're pretty much SOL, unless you buy an a-series front end, and a silencer to keep the SD look. Link to a pic of the FF laser/light mount, courtesy of UN Company: www.uncompany.com/images/ff-mp5lasermount_big.jpg ...CA also makes a similar mount, but it doesn't have the leet looking heat shield. Rustspot isn't talking about an entirely new grip...it's more like a set of RIS rails mounted on a hose-clamp that fits around a silencer...I'll see if I can dig up an example. Edit: pic from Redwolf: www.redwolfairsoft.com/redwolf/upload/product/img/G-03-008-L.jpg |
|
box
New Member
TM MP5 SD5, KWC 92F Beretta
Posts: 71
|
Post by box on Aug 14, 2003 13:28:17 GMT -5
Thats interesting. Thanks for the info.
|
|
|
|
Post by sUpEr K-@Z2-K on Aug 22, 2003 16:39:59 GMT -5
I'm buying a real-steel mount for my sd6, it allows you to attach a laser and light to the silencer.
|
|
). Just bolting a rail onto the foregrip would be flat out oogly, IMO. If you just want a light or laser (one or the other - not both), First Factory makes a mount that goes over the base of the front sight post...and looks like it'd look nice on a gun. If you want a vertical grip, you're pretty much SOL, unless you buy an a-series front end, and a silencer to keep the SD look.
