Merrick
New Member
VSR Gspec, SR-15, M4 CQB, KJW M9, VFC M&P9
Posts: 241
|
Post by Merrick on Aug 11, 2003 14:47:27 GMT -5
I have a SR16 that I am looking to upgrade to around 400 fps. I have modified the gun so far only in its appearance by adding a G&P SR25 Kit and a 6.04mm inner barrel. I am looking for the most durable and least expensive upgrade I can find. Any thoughts or ideas would be a great help.
Thanks,
-Merrick
|
|
|
|
Post by Jacko on Aug 11, 2003 14:49:35 GMT -5
This is kind of an oxymoron, but if I were you, I'd probably get in touch with WTS Mike and send your mechbox over to him for upgrading. If he can't do it, Combat Depot would be my bext choice.
|
|
Merrick
New Member
VSR Gspec, SR-15, M4 CQB, KJW M9, VFC M&P9
Posts: 241
|
Post by Merrick on Aug 11, 2003 20:39:56 GMT -5
I found out it will take at least a M120 spring, new gears, and metal bushings to take me up near 400 fps. Now to decide whether to try it myself or find someone with more experience.
|
|
|
|
Post by xaos on Aug 11, 2003 21:42:03 GMT -5
If it's your only gun, get someone with experience to do it. Upgraded parts don't do any good in a non-functioning gun  |
|
leanpocket25
New Member
Sr-16 350 fps w/ accessories
Posts: 515
|
Post by leanpocket25 on Aug 13, 2003 23:35:21 GMT -5
If u get an m120 or higher u will eventually havbe to get a progearbox.
|
|
|
|
Post by sUpEr K-@Z2-K on Aug 22, 2003 16:42:33 GMT -5
get a helical gear systema gear set, metal bushings, and a M120
That should get you to 400fps without reinforcing the gearbox. You could do the installation yourself (which is not to bad if you find tutorials on the web for the SR-16 (and there are a lot out there). Or you could send it to Francois at Combatdepot.com he charges $35 and is great to work with.
|
|
|
|
Post by Bigmack on Aug 22, 2003 17:39:59 GMT -5
my setup is:
Stock Marui Gearbox
Alluminum piston head
alluminum piston
M120
Systema flat torque up gears
shim set
oilless bushings.
i've had that setup for around 18 months or so now... and i've only had to take it apart once for a problem.
(Problem was no big deal, screw holding the head to the piston came out and jammed the gearbox. 2 minute fix)
|
|
