|
|
Post by porthose on Jul 29, 2003 17:42:22 GMT -5
My m4 barrel is wobbling, it's not affecting the shot, but is incredibly annoying, i have taken apart my gun to find the problem and i have a general idea where the problem is but can't get to it, any suggestions or reasons why it's wobbling.
|
|
|
|
Post by xaos on Jul 30, 2003 2:18:28 GMT -5
Do a search. Either here, or at www.airsoftplayers.com. The colt barrel wobble problem is well-documented, and if I remember correctly, a simple fix. |
|
|
|
Post by luke213 on Jul 30, 2003 8:37:50 GMT -5
Well this problem is usually right above the delta ring where the outer barrel connects to the upper receiver. The connection is made with two screws and a set screw and thats all that holds the outer barrel assembly to the upper receiver. So the problem results from to much movement in this connection, you can tighten these screws and that will last a while, but your going to need a more long term solution down the road. WHen you get to that point you can get a one piece outer barrel, like the one from "First Factory" or you can get a reinforced connection for the junction. Either way not to expensive. Also some people have claimed installing a M203 launcher has solved their wobble(not the RIS version), though others have said it made it worse. So do some research as xaos said on airsoftplayers.com and see what you can come up with as the best solution. I believe they also have a review their of the outer barrel I was talking about.
Luke
|
|
|
|
Post by porthose on Jul 30, 2003 20:24:15 GMT -5
I'm about as sharp as a baseball. That's why I used stupid text speak. guys for your help. ;D
|
|
