|
Wireing
Jul 11, 2003 19:46:25 GMT -5
Post by Toothbrush on Jul 11, 2003 19:46:25 GMT -5
well the wireing on my M-4 is messed up i found were the problem is i just need to fix it i think i can just soder it but i want more opions first... the problem is @ the fuse box on the red wire before the fuse { you can see the wire i am talking about part # M4-32} the cap came off and now it doesnt hook on to the connector so i thought i would just soder... I'm about as sharp as a baseball. That's why I used stupid text speak.
|
|
|
Wireing
Jul 12, 2003 0:01:29 GMT -5
Post by Rustpot on Jul 12, 2003 0:01:29 GMT -5
solder should do it, then reinforce with electrical tape
soldering can break easily on wire connections, so make sure your fuse box is on good and the wires dont get pulled/flexed
|
|
|
Wireing
Jul 12, 2003 0:14:42 GMT -5
Post by Toothbrush on Jul 12, 2003 0:14:42 GMT -5
ok, I'm about as sharp as a baseball. That's why I used stupid text speak.
|
|
|
Wireing
Jul 17, 2003 23:36:11 GMT -5
Post by Savage on Jul 17, 2003 23:36:11 GMT -5
Might want to skip the electrical tape and go with some heat shrink tubing....
Seems like most tape isn't very durable for the long run.
|
|