I3 1 L L
New Member
Very Unleet
Everything you read on the Internet is true
Posts: 436
|
Post by I3 1 L L on Jul 3, 2003 0:53:31 GMT -5
Alright, For the past couple of days I have been researching my sniping mod I am getting for my SR-16. As most people do when they turn there SR-16 into a sniper rifle of some kind they get the extended barrel and the extended R.I.S as I to plan on getting. The coversion kit I plan on getting is from www.uncomany.com and I am getting the specific one with the 380mm barrel and extended R.I.S and I have onyl found one supressor that will cover that extended barrel. The One Touch supressor that comes with most of the higher grade SR-25 kits (The same one Brian has on his SR-25) And I was wondering if there is any other variety of supressors that will fit over the extended bareel and was also wonderinf if this supressor in particualr will work www.wargameclub.com/pcart/shopper.php?itm=GRS-SL-OPS- Its the GRS OPS High Accuarcy Supressor and If it doesnt what type of adapter would I need to possibly make it fit  thanks much |
|
|
|
Post by Minky on Jul 3, 2003 6:49:36 GMT -5
You'll have to be more specific in regards to which kit you're looking at if you want us to know what you're talking about...that way we can help you better.
As for the OPS silencer, I'm 99.9% sure it'll only work with a stock(or close to it) barrel assembly from the front sight onward. The silencer uses the threads on the stock barrel and also attaches to the bayonet lug, so unless you keep those 2 things intact and in proper relation to each other, I don't think it'll work.
|
|
I3 1 L L
New Member
Very Unleet
Everything you read on the Internet is true
Posts: 436
|
Post by I3 1 L L on Jul 3, 2003 10:57:55 GMT -5
The kit that I am currently looking at is G&P RAS Free Floating ( 260mm ) kit. Also if the OPS supressor doesnt work is there any other variaties that I can choose from?
|
|
|
|
Post by Munin on Jul 3, 2003 11:34:13 GMT -5
Sorry, Bill but it must be said. The words are "suppressor" (note the 2 p's and 2 s's) and "compatability."
To answer your question, there should be documentation somewhere as to what thread pattern the suppressor uses (clockwise, counterclockwise, thread pitch, etc). So long as the threading on both the barrel and the suppressor match, you shouldn't have any problems.
|
|
I3 1 L L
New Member
Very Unleet
Everything you read on the Internet is true
Posts: 436
|
Post by I3 1 L L on Jul 3, 2003 12:07:41 GMT -5
I realize what thread is required for which  Im not a Newb ..I was just curious if there was a variety of One Touch supPresSors that can be used on a non threaded barrel |
|
Im not a Newb