|
Post by sUpEr K-@Z2-K on Jun 25, 2003 15:34:54 GMT -5
Yeah my gun got messed up at wolverine fury...
Sometimes the trigger doesn't activate the power to the gears (no sound or nothing when pulled)... however if i punch the side of the gun it usually will come back...
might it be a lose connection with the trigger in the gearbox (im going in there soon anyways)
|
|
|
Post by Viking on Jun 25, 2003 15:47:38 GMT -5
I had a similar problem, I was expecting the worse but after taking the gear box part in my SR16 I found that the connection was extremely dirty. When you pull the trigger you push a post between two prongs, that’s where it was dirty, it was so dirty it never made contact so I got no response at all. Open it up and check it out, could be the exact same problem.
|
|
|
Post by Bigmack on Jun 25, 2003 16:15:10 GMT -5
it gets dirty because the grease in the mechbox is 'burned' if it gets between the prongs.
|
|