Pochey45
New Member
You wanted the best, here I am.
Posts: 8
|
Post by Pochey45 on Apr 22, 2003 11:06:20 GMT -5
Alright I have a small problem here. I adjusted the hop up and fixed everything internally but when i shoot roughly 50+ yards the bb's start to curve almost every time. I use .25 bb's so I imagine that's not it. Anyone have a solution to this?
|
|
|
Post by Minky on Apr 22, 2003 12:39:27 GMT -5
50 yards is probably close to the maximum range of your gun, and the BBs tend to act however they want when you get to the end of your range. Remember, hop-up is putting spin on your BBs, so once they start slowing down the spin can make them curve off to one side. Just be happy your BBs are getting out to 150 feet in the first place.
|
|
|
Post by Bigmack on Apr 22, 2003 13:13:06 GMT -5
welcome to the concept of gravity, kids...
|
|
Pochey45
New Member
You wanted the best, here I am.
Posts: 8
|
Post by Pochey45 on Apr 22, 2003 14:08:21 GMT -5
I forgot to specify the direction of the curve. And insults are not needed I took physics I know trajectories and such. It goes off to the right* nearly every time. Sorry I didn't specify and thanks for the asshole comment Bigmack, I don't appreciate being insulted.
|
|
|
Post by Newman on Apr 22, 2003 14:26:47 GMT -5
Bigmack, better watch out there, he might be older than yeh.
|
|
|
Post by Jacko on Apr 22, 2003 15:34:00 GMT -5
As if Bigmack cares about other people at all, Newman. In any case, what brand of BB's are you using, Pochey? TM, Excel...? I may have missed it, but what sort of weapon are you firing here?
|
|
Pochey45
New Member
You wanted the best, here I am.
Posts: 8
|
Post by Pochey45 on Apr 22, 2003 15:44:06 GMT -5
I have a g3-sg1 with accurate barrel and .25 TM bbs.
|
|
|
Post by Jacko on Apr 22, 2003 15:54:29 GMT -5
Did you recently lube the barrel or the magazine?
|
|
Pochey45
New Member
You wanted the best, here I am.
Posts: 8
|
Post by Pochey45 on Apr 22, 2003 16:00:44 GMT -5
no, figured I wouldn't have to it's brand new.
|
|
|
Post by Newman on Apr 22, 2003 16:14:01 GMT -5
If it's brand new, then all of the old lube (if there was any to begin with) might have dried up. I'd relube it if I were you. Silicon spray/oil works best.
|
|
|
Post by Jacko on Apr 22, 2003 16:14:07 GMT -5
Well, you've got me. Lube will send BB's all over the place, but if it's consistently curving to the right after 50 yards, just look for damage to the barrel and nozzle, I guess. Not sure what else to say.
|
|
|
Post by Bigmack on Apr 22, 2003 17:34:13 GMT -5
make sure it's not clipping the front cosmetic barrel. mine was 'drooping' at a point, and clipping BB's sending them all over the place. no offense intended, Pochey... that was just a joke. you'll know when i insult you.
|
|