Newt
New Member
MP5-SD5
Posts: 27
|
Post by Newt on Apr 13, 2003 21:21:19 GMT -5
My MP5-SD5 is a great gun and all, but it just wont fire most of the time. I don't trust the pink rounds that I used however, even though they are .20 gram. Its a 50% chance that the gun will shoot and I can't take that chance out on the battlefield. I've tryed multiple caps both reg and hi and the gun just wont funtion properly. Another thing is my Hi cap wont work as well its not feeding any BB's when I wind it nothing happens and the BB's wont even come to the surface to prepare to be shot. Any suggestions on both my gun and hi cap?
|
|
|
Post by Bigmack on Apr 13, 2003 21:34:23 GMT -5
sounds like the quality of the BB's you're using is questionable. Buy some KSC/Marui/Excel BB's in the future. As for the hicap, sounds like a jam to me.
disassemble the hicap by:
1)removing the pin at the top, push it through from either left to right.
2) Pull the assemble inside upward. the gears and other guts should come with it.
3) stop and look at the assembly. try to identify what might be causing the jam. in the past, i've had 2 different problems causing jams. one was a piece of mis-formed plastic that was in a bag of Marui's, the other was a piece of bark from a skirmish that had found it's way into the hicap.
get some good quality BB's, and it shouldn't be an issue any longer.
|
|
|
Post by Knief on Apr 14, 2003 18:09:22 GMT -5
You are winding your hicap right? it can take around or above a good 30 seconds of winding.
|
|
Newt
New Member
MP5-SD5
Posts: 27
|
Post by Newt on Apr 14, 2003 20:17:36 GMT -5
hehe, yes I most definatly did try winding it, for awhile too. I think however that taking apart the hi cap is the best solution, I just didnt know how. thank you both
|
|
Newt
New Member
MP5-SD5
Posts: 27
|
Post by Newt on Apr 14, 2003 20:24:04 GMT -5
this pin is stuck Im afraid, it wont budge no matter what I use to push on it with, know how to get it out?
|
|
|
Post by Bigmack on Apr 14, 2003 20:25:54 GMT -5
pin? which pin?
|
|
Newt
New Member
MP5-SD5
Posts: 27
|
Post by Newt on Apr 14, 2003 20:39:16 GMT -5
aaaaaarrrrrrgh ignore that last one I inally got it but these guts arnt showing me anything, should I take apart the "guts" too?
|
|
|
Post by Bigmack on Apr 14, 2003 21:03:54 GMT -5
load some bb's into the hopper and spin the gear are they feeding up the tube? are the gears spinning?
|
|
Newt
New Member
MP5-SD5
Posts: 27
|
Post by Newt on Apr 15, 2003 19:37:45 GMT -5
The gears are spining only sometimes, but the BB's are not feeding up the tube.
|
|
|
Post by Bigmack on Apr 15, 2003 21:07:55 GMT -5
sounds like a hicap prob to me. guess you'll havto take it down and peer into the guts some.
|
|