|
|
Post by Tex on Nov 7, 2007 21:37:17 GMT -5
Please leave feedback for my Repair work and Customization here separate from that of personal sales that I do. Thanks  |
|
|
|
Post by Blindshot on Nov 7, 2007 22:32:50 GMT -5
Tex does all my repair and upgrade work for my lovely guns. So far hes has fixed my 1911 gbb, M4, Soc16, and m24. the only gun he hasn't touched of mine is my lil shotty. But seriously, if you know me and or have played with/against me, you know that my guns work very well. Tex is the only person i trust to work on my guns and with the new repairs he did to my M4, its shotting better now then when i first got it. He knows how and what to do inorder to get your weapon back up and running. He does a great job and ill keep going back to him.
|
|
|
|
Post by Flipper on Nov 8, 2007 7:54:02 GMT -5
What can I say that Blindshot has not already? I for one will send my repairs to him in the future, he did an excellent job!
A+
|
|
|
|
Post by Mirage on Nov 8, 2007 9:18:02 GMT -5
Definately a great tech... when i first got my Maruzen L96, the trigger assembly was all jacked up... but then here comes tex to save the day and get all the trigger springs in the right place.
Great tech, great guy, ill be going to him whenever one of my weapons goes down.
|
|
|
|
Post by Mosin on Nov 8, 2007 12:37:30 GMT -5
Knows more about the guns he works on than anyone I've ever met. He can walk into a gun that he's never worked on before and tell you what's wrong with it and fix it for you extra fast. He's done about $150 in upgrades on my gun, and I couldn't be happier with the results, I suggest going to him if you have any work that needs to be done on airsoft guns.
|
|
|
|
Post by operatordoc01 on Nov 8, 2007 14:46:25 GMT -5
Well where should I start.
1. He is the MOA Repair Tech, would not have asked him to be if he was not as good as he is in this area.
2. L96 Zero trigger broke a spring. He took it apart and completely fixed everything that was wrong with it. Mind you that he never had taken one of these apart before ever. Wored 10 times better once he fixed it.
3. Installed a completely new hopup and bucking in my CA 249 SAW for me and it is working great.
4. Does all the needed after game maintance checks on all of the MOA rental units to make sure they are in tip top shape before we rent them out again.
He is just a great all around guy.
OpDoc
|
|
|
|
Post by Nexus on Nov 8, 2007 15:05:58 GMT -5
Tex has fixed a whole slew of my teams guns since July. He does and excellent job, and is very cheap. (Which is great.) We took some of the guns to another local tech who said a couple of the guns were unrepairable or parts couldn't be found for them. Gave them to Tex and he has found everything for them, fixed them to opperational condition for only like $40 in these two cases. The other guns he fixed for a mere fraction, and I MEAN A FRACTION, of what the other local tech was charging. Tex is a great guy, and he will be getting all of my teams repair work in the future, as long as he is willing.
|
|
|
|
Post by Connors on Nov 8, 2007 20:16:36 GMT -5
Long, long ago, at a game far, far away, my 1911 took a dive right inot the sand. He cleaned it and got it shooting again. If it hadn't been for him, I'd of ended up either trying my luck at it(probably unsuccesfully), or sending it out to someone I really don't trust as much to get it cleaned and back in working order.
As for upgrades and internal stuff, he knows his shit. If you have internal problems or just need an upgrade done, he's the go-to guy. If he did it, you can trust it will run untill something breaks.
|
|
Striker
New Member
Arm yourself because no one else here will save you.
Posts: 233
|
Post by Striker on Nov 20, 2007 23:43:04 GMT -5
Tex upgraded my CA25 which I'm very pleased with, recently he suggested some new upgrades for it that I am very soon going to take him up on. He also threw a new hop-up in my CA M4 which is still doing what it's supposed to do. In short, don't hesitate about leaving your gun alone with Tex. I'll personally vouch for him. |
|
|
|
Post by Maverick on Feb 5, 2008 15:05:33 GMT -5
Well I didnt see a regular Tex thread so this goes here I guess.
Bought his propane adaptor, he couldnt find it at the first Op after the deal, but he gave me a new can of green gas to hold me over. Got it to me next game, no problems.
A+
|
|
|
|
Post by pearldrummer on Feb 17, 2008 17:45:36 GMT -5
He did a total overhaul on my TM SOCOM 16. The gun works flawlessly, Im very impressed with his work and the paintjob looks amazing! Tex is my go-to guy for gun repairs and I would recomend this guy to anyone!
|
|
|
|
Post by Mirage on May 14, 2008 2:38:08 GMT -5
During this last week, as well as a couple prior weeks, the big man here has been working my M4. Finally, after a bunch of soldering, random parts, and a couple other things, Big Texas has got it up and running and shooting beautifully.
Great work, knows what hes doing, I dont trust anyone else with my replicas.
|
|
|
|
Post by Blindshot on May 14, 2008 2:48:39 GMT -5
When my CA M15A4 went down during RT2, Tex took my weapon under his wing and diagnosed the problem. He found out that my gears, piston, and wires needed to be replaced. He did a lot of soldering and shimming gears to perfection. He also helped to some custom dremel work to help ease wires to my fairly new crane stock. He does great work and its incredibly helpful to know that someone can fix all the problems with an AEG before the next big op.
Thanks again big fella, and great work
Blindshot
|
|
|
|
Post by <<Gomrick>> on Jul 29, 2008 12:41:43 GMT -5
Tex does a great job! I just need to get a large battery to run it but it works! Thanks a lot man, worth every penny.
|
|
|
|
Post by crazyrabbit on Dec 15, 2008 23:55:39 GMT -5
Tex has some 1337 skills on the field as well as in his repair room. He fixed my ptw which entailed him to take wires off of my $200 EL2 switch and re-solder new ones on. He also has done a 3 round burst mod to it. I trust him in every aspect of fixing my guns.
|
|
