Robo
New Member
Sig 550, p90, spring uhc usp, KWC gbb 1911
Posts: 312
|
Post by Robo on Mar 3, 2002 21:03:06 GMT -5
;Dwell at op:blackhawk down my sig was having problems with the hop-up unit and then near the end it stopped shooting all together... so when i got home that night i decided to take it all apart, then i fell asleep. just yesterday did i pick it up and take a look at it. there was a bb jammed way down in the barrel and i could not get it out by just poking at it with the loading tool. so i had to completely take off my barrel. after that was fixed i noticed that my hop-up was not connected right, and i fixed that. it took a while to get it all back together just right but i did it! works perfect! plus to now i know exactly how hop-up works, and exactly where everything goes in my gun1 ;)wooooohhoooooo ;D
|
|
|
Post by Newman on Mar 3, 2002 22:07:53 GMT -5
If only my MP5 were that easy to fix...
First, tappet plate.
Second, trigger.
Third, valve? Must...fix...MP5.
|
|
Robo
New Member
Sig 550, p90, spring uhc usp, KWC gbb 1911
Posts: 312
|
Post by Robo on Mar 3, 2002 23:06:32 GMT -5
sorry newman even my sig is not "that easy", i just did not want to right a page long on how many times i spent forever putting it all back together, only to realize i forgot something, or put something in wrong. one time that i put it together the cylinder was leaking air cuz i put a small gasket/sleeve in wrong, so it only shot about 20 feet. but its fixed now good luck with your gun newman
|
|