|
Post by Gunslinger on Mar 13, 2013 2:28:34 GMT -5
I will make a separate review of the tm once I can do a tear down next to a kwa.
So far the gun and mags are smaller than the kwa. It has a completly different bolt and bolt carrier, the hop up is exposed when you push the trigger forward in the open part of the bolt.
The mags have a knocker on the back of them that covers the valve. It is interesting.
The over all look of it is very nice. But because the gun is so small my hand dosent fit the pistol grip with out hanging off. The flat finish is like a real steel machine pistol (I would assume).
It comes with a 12mm- thread adapter that ups it to a 14mm- thread for standard surpressors. I will get one this weekend or sooner and post picture comparisons and maybe a small couple vids.
Then it will probably be in the comerse section ha ha.
|
|
|
Post by Legionnaire on Mar 13, 2013 10:28:23 GMT -5
Thats disappointing to here it's smaller than the KWA. As far as I'm aware, the KWA is already smaller than the real steel.
|
|
|
Post by Gunslinger on Mar 13, 2013 11:57:51 GMT -5
Yeah it is defanintly a small gbb. But since I don't have a side by side to compare it to I could be wrong. I don't think so though.
|
|
|
Post by MHavoc on Mar 13, 2013 19:28:01 GMT -5
So I've acquired a number of new shinies recently. I apologize that the pics are not the greatest. Don't have the best of cameras to work with. First up is the Umarex/Ares G36KV. Which I scratched some of the paint on the end of the barrel removing the orange flash hider. The suppressor is new as well. Little beaten up after last Saturdays matches at Kalamazoo Airsoft. Next is the G&G Combat Machine Raider. With a G&G vertical grip. Lastly is the new rifle I pulled from my Airsoft GI Mystery box today. The A&K UkArms SVD. Test fired it, liked it so far. Rounding this off are two box sets of mags. A 5 Mag set for the G36 and a 6 Mag set for the M4.
|
|
|
Post by Cats (Doom) on Mar 18, 2013 15:04:18 GMT -5
Thanks to Talisman for recommending OML Patches. Also just ordered this: Came from a DOD auction I'm told. It looks like a Blackhawk STRIKE but no branding, any ideas about what brand it might be? Maybe I'll know more when it arrives.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 18, 2013 15:47:58 GMT -5
Eagle MMAC/DPC and a CGF tc2000 If anyone is interested in either of these let me know, otherwise they'll probably end up in the commerce section soon since I don't need them.
|
|
|
Post by Knief on Mar 18, 2013 16:23:47 GMT -5
I can only assume you wouldn't trade the EI MMAC for my MRC APC, yes? Ah, a man can dream.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 18, 2013 16:32:56 GMT -5
Yes, a man could certainly dream (ah, if only this thing were aor1)... Unfortunately no, I wouldn't do that unless there was something else included with the APC that made it similar value.
|
|
|
Post by Knief on Mar 18, 2013 16:39:18 GMT -5
What is the going rate for the MMAC? I only did a quick search, but dien't turn upnso much as an MSRP.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 18, 2013 16:46:33 GMT -5
There isn't one really, since they aren't available on the commercial market. I am actually a bit confused about the eagle's 6094 style plate carrier anyways. What appears to be the same carrier has been listed several different ways (all printed on tags, not just what people call it) DPC - Devgru plate carrier MMAC- Modular Maritime Armor Carrier (I've only ever seen these ones in aor1/2) MMAC - Muli Mission Armor Carrier Mine is the latter MMAC, which I've never seen for sale on the commercial market. I've only ever seen the DPC, which was on SKD a while back for like $270. They generally go for a bit more than that now unless in aor1/2 in which case they are through the roof. Eagle also has the same thing up on their site now but with a Crye Style built in triple m4 pouch. I don't think you can buy it though, at least not yet. www.eagleindustries.com/products/detail.aspx?id=231
|
|
|
Post by pxranger on Mar 20, 2013 22:28:27 GMT -5
Got my Millet DMS-1 and Primary Arms mount today. The KJW didn't like the MIAD grip, so...yeah, that'll be up for sale in the Commerce Section. Still have yet to add on the PRS stock, too. BCG, charging handle, and inner barrel are not present because I got some dremeling to do tomorrow.
|
|
|
Post by Myers on Mar 20, 2013 22:41:24 GMT -5
Holy fuck that is hot. A PRS stock will look gorgeous on that setup, as well as an MOE grip. Planning on any paint? I think ARC could make that gun an instant orgasm on sight.
|
|
|
Post by pxranger on Mar 20, 2013 22:47:05 GMT -5
Holy fuck that is hot. A PRS stock will look gorgeous on that setup, as well as an MOE grip. Planning on any paint? I think ARC could make that gun an instant orgasm on sight. Thank you. Me and ARC had already discussed A-TACS FG, but both of us came to the same conclusion of keeping her black. Not sure if the MOE would fit, seeing how the MIAD didn't. Which pissed me off, no doubt.
|
|
|
Post by Yankee on Mar 20, 2013 22:50:20 GMT -5
Holy fuck that is hot. A PRS stock will look gorgeous on that setup, as well as an MOE grip. Planning on any paint? I think ARC could make that gun an instant orgasm on sight. PRS seconded.
|
|
|
Post by pxranger on Mar 20, 2013 22:53:32 GMT -5
Holy fuck that is hot. A PRS stock will look gorgeous on that setup, as well as an MOE grip. Planning on any paint? I think ARC could make that gun an instant orgasm on sight. PRS seconded. Ha ha, I got one for her (got it from ARC), but haven't mounted it yet. ;D
|
|