|
Post by Myers on Mar 20, 2013 22:56:08 GMT -5
Aww man, the MIAD grip would look so sexy... Probably even better than the MOE. Many feels for you for being pissed off by the fact that it wouldn't fit. No possible way of custom modification to make it work?
|
|
|
Post by pxranger on Mar 20, 2013 23:01:55 GMT -5
None. I stared at it for a good minute in disgust, too, ha ha. But I do believe ehobbyasia has KJW MagPul grips, but the pain of overseas shipping for just few items, phef.
|
|
|
Post by Myers on Mar 20, 2013 23:19:06 GMT -5
Took a quick look on ehobbyasia, and I was unable to find a KJW MIAD grip. Although, I am not familiar with their site, I haven't ordered overseas yet. (And honestly, I plan to avoid doing so.) If you are able to find the working grip overseas, I would totally be all for it. Would be an awesome addition to an already sexy gun.
|
|
|
Post by pxranger on Mar 21, 2013 3:18:19 GMT -5
Just looked it up. A MagPul PTS MOE grip will fit, but I'm still not sure about the MIAD. Here is a KJW M4 from ehobbyasia with the PTS MOE grip on her (though this KJW is custom): shop.ehobbyasia.com/eac-kjw-m4-moe-magpul-custom-gbb-black.htmlNot sure about this place, but they have a MIAD for GBBRs in the upper left corner, Integrity Tactical Solutions: www.integritytacticalsolutions.com/?p=products2&b=list&c=82But seeing how the PTS MOE is on the KJW in the first link, I think I'll play it safe and go with the MOE grip for a positive fit. And to play it even more safe, on arniesairsoft in the mega KJW review thread, I've asked what MagPul grips will fit the KJW without any problems. I'll let you know.
|
|
|
Post by pxranger on Mar 23, 2013 2:41:28 GMT -5
My good friend Phil helped me out on the dremeling and drilling to get the hop unit to fit into the AEG outer barrel, so far, everything seems to be good fit. Just have to attach the PRS stock tomorrow and put some rounds down range to see if all is well. A work in progress is nearly complete.
|
|
|
Post by UAD Airsoft on Mar 23, 2013 6:09:28 GMT -5
Picked up some 5.11 tactical pants and reversible belt. Very comfy so far! Pics later.
|
|
|
Post by M.S.-ARC on Mar 23, 2013 9:32:15 GMT -5
pxranger good to see the completed project and yeah that thing should stay black. Looking very good. EDIT: The MOE grip definitely fits. You just have to shave something down in the grip with a dremmel. There's a small piece that gets in the way. It's only a 3 minute fix. Make sure you take off a little at a time though. Worst thing you can do is take off too much and have a wobbly grip. I've got it installed on two of my KJW's.
|
|
|
Post by pxranger on Mar 23, 2013 17:35:23 GMT -5
Ah, thanks ARC. The RS MIAD's hole for the selector spring is in a totally different place than on the KJW's grip. And this would be the PTS MOE (MagPul-047) correct? I did see some MOE KJW M4s on ehobbyasia, and also found this: www.popularairsoft.com/news/kj-works-m4-moe-cqb-gbb-rifleSo I take it the hole for the selector spring in the PTS MOE grip is in the same spot as the selector spring hole in the KJW's stock grip? Which would make it that much easier to mod.
|
|
|
Post by Deacon on Mar 23, 2013 17:55:58 GMT -5
Real steel MOE's should fit just fine. The one I had on mine did.
|
|
|
Post by pxranger on Mar 23, 2013 18:04:51 GMT -5
That's what I was told about the RS MIAD grip. But there's no way in hell that's going on that I see. And after all the modding to the AEG inner and outer, I can assure you we gave it a good look over, ha ha. *edit, just got the MagPul PRS on with electrical tape acting as a new stock tube sleeve for the KJW. Wrapped enough tape around the tube making the fit just a bit too snug for the PRS tube attachment. Then slightly pulled apart the attachment to slide over the tape, VERY snug. The I removed the sling attachment from the rear of the PRS stock and used it as a clamp for the PRS tube attachment. Very, very solid fit. ;D
|
|
|
Post by Doctor on Mar 25, 2013 16:20:44 GMT -5
Minus the glock, just got this in the mail. Uploaded with ImageShack.us
|
|
|
Post by Tank on Mar 30, 2013 19:44:32 GMT -5
My latest addition to my arsenal. Now I just need to make it reliable, and construct a vehicle mount. Edit: What do you guys think, should I paint it, or leave it black?
|
|
|
Post by Echelon on Mar 30, 2013 20:35:50 GMT -5
Edit: What do you guys think, should I paint it, or leave it black? Depends on your impression man. Lots of snake skin painted rifles out there for no damn reason.
|
|
|
Post by snafu on Mar 30, 2013 20:43:43 GMT -5
Very nice Tank! My buddy in Tennessee engineers mounts for lmg's on Vehicles. Anyhow here is a link to what they make. www.milsysgroup.com/productsThe mounts they sell are really expensive and used by SF and the like, but maybe seeing what they make could help you with some ideas to rig together.. Edit. Leave it black!! I've never been a fan of painted support weapons.
|
|
|
Post by ~Hambone~ (3.14) on Apr 2, 2013 22:36:29 GMT -5
My recent ACQ: WE 1911 Tactical...I added the light and Moc. Suppressor.
|
|