sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 9:51:48 GMT -5
I just Bought a KJW m9 from AA. I have only had it for about 3 days and have only used it like 3 times mostly at Chewcky's house. I tried to shoot it today and yesterday and it wouldnt shoot the bbs semi-auto i have to cock it back every time like a springer.
Has this Happened to any of you if so please tell me whats going on and how to fix it would be even better.
Thanks.
|
|
|
Post by luke213 on Jun 23, 2003 9:55:31 GMT -5
Not terribly familiar with that problem nor GBB's but it wouldn't hurt to spray the shit out of it with Silicone since it could just be the blowback mech is stuck or something. None the less don't quote me on this but it's worth a try and it damn sure isn't going to hurt anything especially if you've been using duster gas.
Luke
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 10:05:12 GMT -5
Thanks Luke that seemed to work pretty good i used about half the bottle and now i only have to cock it back around ever 4 shots. Its improvement maybe ill spray it down some more. If that fails, well thats what ebayis for, right.
|
|
|
Post by luke213 on Jun 23, 2003 10:06:52 GMT -5
Are you using duster gas?
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 10:11:40 GMT -5
Green Gas...
|
|
|
Post by luke213 on Jun 23, 2003 10:13:42 GMT -5
Ok I was gonna tell you to spray the nozzle with the gas valve depressed but with green gas internal lube shouldn't be a problem. There's nothing on the slide catching or anything is there? Did you take off the slide to lube it? If not do that it's allot more effective and also spray the slide rails there is allot of friction there. Otherwise give it some time to work some things loose. The silicone should loosen it up if thats the problem.
Luke
|
|
|
Post by Jacko on Jun 23, 2003 10:16:47 GMT -5
Is this the 'Lite' KJW M9?
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 10:20:56 GMT -5
Luke, i did every thing u said except for give some time so i guess ill spray it down again and wait like an hour or so and then ill try it again.
Thanks.
|
|
|
Post by luke213 on Jun 23, 2003 10:22:40 GMT -5
Well I meant working it into it like racking the action a couple dozen times to get some lube into the hard to reach spots:)
Luke
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 10:24:07 GMT -5
|
|
|
Post by Minky on Jun 23, 2003 11:07:51 GMT -5
I'd say since it's the metal version, and since it's KJW, you just need to break it in. Take Luke's advice and rack the slide by hand for a while to try and smooth out the action. You could also take the gun apart and look for signs of friction along the slide rails and any other place that rubs during slide movement, and give them a light sanding.
The other possible cause could be gas overpressure in the mag, but that doesn't seem like the problem if the gun is shooting OK for the first few shots.
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 23, 2003 14:18:35 GMT -5
Thanks for the Advice everyone it seems to be working fine now.
Thanks a lot
sPade [KyLe]
|
|
sPade
New Member
KJW GBB m9 1337 Green
Posts: 122
|
Post by sPade on Jun 26, 2003 15:52:01 GMT -5
I fixed it and im selling it any ways.
[DELETE ME]
|
|